EUVIMEDEUVIMED entdecken
EvaluationsstudieOpen Access · CC BY 4.0

A multivariate study on the effect of 3D printing parameters on the printability of gluten‐free composite dough

Abhishek Pradhan iD, Debapam Saha iD, Punyadarshini Punam Tripathy iD

Journal of the Science of Food and Agriculture · 15.03.2025 · 105 (4) · 2578-2593

DOI: 10.1002/jsfa.14031 ↗

Kurz gefasst

Evaluationsstudie in der Zeitschrift Journal of the Science of Food and Agriculture, online erschienen am 28.11.2024. Verfasst von Abhishek Pradhan und 2 weiteren Autor:innen. Beteiligte Einrichtung: Agricultural and Food Engineering Department, Indian Institute of Technology Kharagpur, Kharagpur, India. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Flour, Food Handling. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Engineering Research Board.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

BACKGROUND The advancement of three‐dimensional (3D) food printing technology is significantly influencing the food processing industry. The present study utilized extrusion 3D printing to create a gluten‐free dough composed of little millet flour (LMF), amaranth seed flour (ASF) and curry leaf flour (CLF). The primary objective was to elucidate the effects of various extrusion‐based 3D printing conditions, including extruder nozzle diameter ( ND ), extrusion rate ( ER ), print speed ( PS ) and layer height ( LH ) on the printability parameters of the dough. RESULTS In this study, three formulations of composite dough were prepared (i.e., S1, S2 and S3) by varying LMF, ASF and CLF compositions; among which S1 composite (LMF:ASF:CLF::30:60:10 w/w) was found to have comparable viscoelastic properties with the wheat dough. Central composite design (CCD) was selected with 30 experimental runs and 3D dough samples were printed using S1 composite by varying ND , ER , PS and LH . Principal component analysis of the printed samples accounted for 82.75% of variability and classified the samples into three confidence ellipses. From the results of the CCD model, four solution parameters in terms of ND : ER : PS : LH ::mm: pulse μL −1 :mm s −1 :%, namely, P 1 (1.8:115:8:70), P 2 (1.6:115:7.8:65), P 3 (2:100:7.8:55) and P 4 (2:105:6.2:75), with high desirability value (> 0.85) were selected for sample 3D printing and post‐baking analysis. The P 1 sample was found to have least print deformations, highest print fidelity (85.66%), and lowest hardness (55.95 N) and fracturability (39.66 N) values, and hence was selected as optimized product. CONCLUSION The present study provides parametric solutions for efficient 3D printing of gluten‐free composite dough, aligning with the increasing dietary preferences and demand of novel functional customized foods. © 2024 The Author(s). Journal of the Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalFlourFood HandlingGlutensAmaranthusTriticumSeedsMilletsMultivariate AnalysisPlant LeavesViscosity

Stichwörter der Autor:innen

3D food printinggluten‐free doughprincipal component analysisprintability assessmentrheological analysistextural properties

Substanzen

Glutens

Autor:innen und Institutionen

  • Agricultural and Food Engineering Department, Indian Institute of Technology Kharagpur, Kharagpur, India.

ORCID-Profile: Abhishek Pradhan, Debapam Saha, Punyadarshini Punam Tripathy

Förderung

  • Science and Engineering Research Board

Zitieren

APA

Pradhan, A., Saha, D., & Tripathy, P. P. (2025). A multivariate study on the effect of 3D printing parameters on the printability of gluten‐free composite dough. Journal of the Science of Food and Agriculture, 105(4), 2578-2593. https://doi.org/10.1002/jsfa.14031

Vancouver

Pradhan A, Saha D, Tripathy PP. A multivariate study on the effect of 3D printing parameters on the printability of gluten‐free composite dough. Journal of the Science of Food and Agriculture. 2025;105(4):2578-2593. doi:10.1002/jsfa.14031

BibTeX
@article{Pradhan2025,
  author = {Pradhan, Abhishek and Saha, Debapam and Tripathy, Punyadarshini Punam},
  title = {A multivariate study on the effect of 3D printing parameters on the printability of gluten‐free composite dough},
  journal = {Journal of the Science of Food and Agriculture},
  year = {2025},
  volume = {105},
  number = {4},
  pages = {2578--2593},
  doi = {10.1002/jsfa.14031}
}
Kostenlos starten →