Furfural production from xylan using a Pueraria Residues carbon‐based solid‐acid catalyst
Journal of the Science of Food and Agriculture · 2025-02 · 105 (3) · 2002-2011
DOI: 10.1002/jsfa.13976 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of the Science of Food and Agriculture, online erschienen am 23.10.2024. Verfasst von Xiangtong Gai und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Chemistry and Chemical Engineering, Jishou University, Jishou, China. Hauptthemen laut MEDLINE: Xylans, Furaldehyde, Pueraria. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 51 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
BACKGROUND The conversion of biomass into high value‐added platform compounds is an important method of biomass utilization. The conversion of hemicellulose represented by xylan into furfural can not only reduce the consumption of fossil fuels, but also promotes the development and utilization of non‐edible biomass resources. In this study, a bifunctional solid‐acid catalyst prepared from agricultural and forestry waste Pueraria ( P. eduli) Residues was used to convert xylan into furfural in a biphasic system. RESULTS In this study, P. eduli Residues was used as raw material to prepare a P. eduli Residues‐based carbon solid‐acid catalyst (PR/C‐SO 3 H‐Fe) by one‐step sulfonation carbonization and impregnation. The catalyst catalyzes the conversion of xylan to furfural in a biphasic system (2‐methyltetrahydrofuran/water). The physicochemical properties of the catalysts were characterized by X‐ray powder diffraction, scanning electron microscopy, differential thermogravimetric analysis, Brunauer–Emmett–Teller surface area, Fourier transform infrared spectroscopy and ammonia temperature‐programmed desorption. Subsequently, the experimental conditions were studied and optimized, such as metal species, iron ion concentration, reaction time and temperature, volume ratio of organic phase to water phase and ratio of substrate to catalyst. The results showed that under conditions of 160 °C, 50 mg catalyst, 100 mg xylan and 7 mL reaction solvent, the yield of furfural could reach 78.94% after 3 h of reaction. CONCLUSION This study provides an effective research method for the conversion of xylan into furfural, and provides a reference for the catalytic conversion and utilization of hemicellulose in agricultural and forestry biomass. It also provides a feasible method for the resource utilization of agricultural and forestry waste. © 2024 Society of Chemical Industry.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- College of Chemistry and Chemical Engineering, Jishou University, Jishou, China.
- Key Laboratory of Hunan Forest Products and Chemical Industry Engineering, Jishou University, Zhangjiajie, China.
- National and Local United Engineering Laboratory of Integrative Utilization Technology of Eucommia ulmoides, Zhangjiajie, China.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Gai, X., Ding, W., He, J., Guo, J., & Song, K. (2025). Furfural production from xylan using a Pueraria Residues carbon‐based solid‐acid catalyst. Journal of the Science of Food and Agriculture, 105(3), 2002-2011. https://doi.org/10.1002/jsfa.13976
Vancouver
Gai X, Ding W, He J, Guo J, Song K. Furfural production from xylan using a Pueraria Residues carbon‐based solid‐acid catalyst. Journal of the Science of Food and Agriculture. 2025;105(3):2002-2011. doi:10.1002/jsfa.13976
BibTeX
@article{Gai2025,
author = {Gai, Xiangtong and Ding, Wei and He, Jian and Guo, Jie and Song, Ke},
title = {Furfural production from xylan using a Pueraria Residues carbon‐based solid‐acid catalyst},
journal = {Journal of the Science of Food and Agriculture},
year = {2025},
volume = {105},
number = {3},
pages = {2002--2011},
doi = {10.1002/jsfa.13976}
}
EUVIMED