EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Enhanced Mid‐Flexion Stability in Cruciate‐Sacrificing Total Knee Replacement: Impact of Optimized Implant Designs Investigated Using Musculoskeletal Multibody Simulation

Maeruan Kebbach iD, Sven Krueger iD, Leo Ruehrmund, Berna Richter, Yukihide Minoda iD, Thomas M Grupp, Rainer Bader

Journal of Orthopaedic Research · 2026

DOI: 10.1002/jor.70066 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Orthopaedic Research, 2026. Verfasst von Maeruan Kebbach und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthopaedics, Rostock University Medical Center, Germany. Hauptthemen laut MEDLINE: Arthroplasty, Replacement, Knee, Prosthesis Design, Knee Prosthesis, Knee Joint. Die Arbeit nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: This study was funded by Aesculap AG, Research and Development, Tuttlingen, Germany..

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Total knee replacement (TKR) is a successful intervention for relieving pain and improving quality of life. In this context, mid‐flexion instability and paradoxical anterior femoral movement remain challenging. However, the role of implant design in cruciate‐sacrificing (CS) scenarios is unclear. Therefore, this study investigated the influence of newly developed CS TKR designs on mid‐flexion stability and anterior‐posterior (AP) translation using a musculoskeletal multibody simulation during squat motion. The multibody model of the lower extremity, which represented the knee joint with ligaments and muscle structures, was previously validated using instrumented knee data. It was used to analyze newly developed (oneKNEE® cruciate‐retaining (CR)/CS and medial‐stabilized (MS)) and clinically established (Columbus® ultra‐congruent (UC) and P.F.C.™ Sigma® CR) TKR designs. For this purpose, the overall femoral AP translation and tibial internal‐external rotation during squat motion (flexion from 0° to 90°) in the CS condition were evaluated. During mid‐flexion, the P.F.C.™ Sigma® CR exhibited greater anterior femoral translation than the Columbus® UC, with posterior movement starting at 35.5° (3.4 mm anterior) versus 20° (2.1 mm). In contrast, the oneKNEE® CR/CS and MS designs showed continuous posterior femoral movement (reduced paradoxical translation), with anterior‐to‐posterior turning points at 9° (1.2 mm) and 13° (0.8 mm) during squat motion, respectively, without inhibiting internal‐external rotation. The kinematics of the oneKNEE® designs were achieved by combining the single‐radius femoral design and steep anterior ramp of the tibial components. These designs reduced paradoxical anterior femoral movement in mid‐flexion in the CS condition, while not restricting tibial internal‐external rotation.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Arthroplasty, Replacement, KneeProsthesis DesignKnee ProsthesisKnee JointHumansRange of Motion, ArticularBiomechanical PhenomenaJoint Instability

Autor:innen und Institutionen

  • Department of Orthopaedics, Rostock University Medical Center, Germany.
  • Aesculap AG Research & Development, Tuttlingen, Germany.
  • Department of Orthopaedic Surgery, Osaka Metropolitan University Graduate School of Medicine, Osaka City, Japan.
  • Department of Orthopaedic and Trauma Surgery, Ludwig Maximilians University Munich, Musculoskeletal University Center Munich (MUM), Campus Grosshadern, Munich, Germany.

ORCID-Profile: Maeruan Kebbach, Sven Krueger, Yukihide Minoda

Förderung

  • This study was funded by Aesculap AG, Research and Development, Tuttlingen, Germany.

Zitieren

APA

Kebbach, M., Krueger, S., Ruehrmund, L., Richter, B., Minoda, Y., Grupp, T. M., & Bader, R. (2026). Enhanced Mid‐Flexion Stability in Cruciate‐Sacrificing Total Knee Replacement: Impact of Optimized Implant Designs Investigated Using Musculoskeletal Multibody Simulation. Journal of Orthopaedic Research. https://doi.org/10.1002/jor.70066

Vancouver

Kebbach M, Krueger S, Ruehrmund L, Richter B, Minoda Y, Grupp TM, et al. Enhanced Mid‐Flexion Stability in Cruciate‐Sacrificing Total Knee Replacement: Impact of Optimized Implant Designs Investigated Using Musculoskeletal Multibody Simulation. Journal of Orthopaedic Research. 2026. doi:10.1002/jor.70066

BibTeX
@article{Kebbach2026,
  author = {Kebbach, Maeruan and Krueger, Sven and Ruehrmund, Leo and Richter, Berna and Minoda, Yukihide and Grupp, Thomas M and Bader, Rainer},
  title = {Enhanced Mid‐Flexion Stability in Cruciate‐Sacrificing Total Knee Replacement: Impact of Optimized Implant Designs Investigated Using Musculoskeletal Multibody Simulation},
  journal = {Journal of Orthopaedic Research},
  year = {2026},
  doi = {10.1002/jor.70066}
}
Kostenlos starten →