EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

In Vivo Study of Bone Growth Around Additively Manufactured Implants With Ti‐6Al‐4V and Bioactive Glass Powder Composites

Chih-Yu Lee iD, Pei-Ching Kung iD, Chih-Chieh Huang, Shao-Ju Shih, E-Wen Huang, San-Yuan Chen, Meng-Huang Wu iD, Nien-Ti Tsou iD

Journal of Orthopaedic Research · 2025

DOI: 10.1002/jor.70037 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Orthopaedic Research, 2025. Verfasst von Chih-Yu Lee und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, University of Maryland, College Park, Maryland, USA. Hauptthemen laut MEDLINE: Titanium, Osseointegration, Glass, Prostheses and Implants. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: This study was supported by the National Science and Technology Council Taiwan (113-2221-E-A49 -043 -MY2) and the Higher Education Sprout Project of the Nation….

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Effective osseointegration is a fundamental requirement in biomedical implant applications. Additive manufacturing allows precise control over implant geometry and material composition, enhancing implant design flexibility. Bioactive glass (BG) can substantially enhance bone binding and bioactivity; however, limited research has been conducted on its incorporation into additively manufactured implants. The performance of BG varies depending on the incorporation method, and the spatial and temporal evolution of its integration remains unclear. In this study, we synthesized Ti‐6Al‐4V/58S BG composites by using the selective laser melting method and systematically compared the effects of BG coating and doping in additively manufactured implants. In vivo histological results from animal tests were statistically analyzed and discussed in terms of osseointegration over 4‐ and 12‐week periods. Bone‐to‐implant contact (BIC) and bone density (BD) were used as quantitative metrics to evaluate interactions between the implants and surrounding bone. Our findings indicate that both BG‐doped and BG‐coated implants accelerated bone ingrowth during the early stages of healing. BG‐coated implants demonstrated a greater improvement than did pure 3D‐printed Ti‐6Al‐4V implants. However, the effects of BG became nonsignificant during the later healing stage (12 weeks). This study provides a foundation for systematically investigating BG incorporation methods in 3D‐printed biomedical implants and their effect on osseointegration.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

TitaniumOsseointegrationGlassProstheses and ImplantsBone DevelopmentAnimalsAlloysRabbitsMalePowders

Stichwörter der Autor:innen

additive manufacturingbioactive glassbiomaterialsdental implantshistomorphometric analysisosseointegration

Substanzen

TitaniumAlloystitanium alloy (TiAl6V4)Powders

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, University of Maryland, College Park, Maryland, USA.
  • Department of Materials Science and Engineering, National Yang Ming Chiao Tung University, Hsinchu, Taiwan.
  • Department of Materials Science and Engineering, National Taiwan University of Science and Technology, Taipei, Taiwan.
  • Department of Orthopaedics, School of Medicine, College of Medicine, Taipei Medical University, Taipei, Taiwan.
  • Department of Orthopedics, Taipei Medical University Hospital, Taipei, Taiwan.

ORCID-Profile: Chih-Yu Lee, Pei-Ching Kung, Meng-Huang Wu, Nien-Ti Tsou

Förderung

  • This study was supported by the National Science and Technology Council Taiwan (113-2221-E-A49 -043 -MY2) and the Higher Education Sprout Project of the Nation…

Zitieren

APA

Lee, C. Y., Kung, P. C., Huang, C. C., Shih, S. J., Huang, E. W., Chen, S. Y., Wu, M. H., & Tsou, N. T. (2025). In Vivo Study of Bone Growth Around Additively Manufactured Implants With Ti‐6Al‐4V and Bioactive Glass Powder Composites. Journal of Orthopaedic Research. https://doi.org/10.1002/jor.70037

Vancouver

Lee CY, Kung PC, Huang CC, Shih SJ, Huang EW, Chen SY, et al. In Vivo Study of Bone Growth Around Additively Manufactured Implants With Ti‐6Al‐4V and Bioactive Glass Powder Composites. Journal of Orthopaedic Research. 2025. doi:10.1002/jor.70037

BibTeX
@article{Lee2025,
  author = {Lee, Chih-Yu and Kung, Pei-Ching and Huang, Chih-Chieh and Shih, Shao-Ju and Huang, E-Wen and Chen, San-Yuan and Wu, Meng-Huang and Tsou, Nien-Ti},
  title = {In Vivo Study of Bone Growth Around Additively Manufactured Implants With Ti‐6Al‐4V and Bioactive Glass Powder Composites},
  journal = {Journal of Orthopaedic Research},
  year = {2025},
  doi = {10.1002/jor.70037}
}
Kostenlos starten →