EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Effects of Plate‐Bone Contact on Bridge Plate Fracture Fixation Biomechanics: Computational, Experimental, and Analytical Modeling

Zachary A Koroneos, Hwabok Wee, J Spence Reid, Gregory S Lewis iD

Journal of Orthopaedic Research · 2025-09 · 43 (9) · 1606-1618

DOI: 10.1002/jor.26114 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Orthopaedic Research, online erschienen am 08.06.2025. Verfasst von Zachary A Koroneos und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthopaedics and Rehabilitation, Penn State College of Medicine, Hershey, Pennsylvania, USA. Hauptthemen laut MEDLINE: Bone Plates, Fracture Fixation, Internal. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: NIBIB NIH HHS, This study was supported by the National Institute of Biomedical Imaging and Bioengineering of the National Institutes of Health under award number R01EB029207..

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bridge plating is commonly used for internal fixation of comminuted fractures. The inner working length between screws has been established as a key parameter controlling postoperative biomechanical stability. However, plate‐bone contact may affect these biomechanics in complex ways, and the offset between the plate and bone is variable across surgeries. The objective of this study was to examine the effects of construct and loading parameters on interfragmentary motion and maximum plate stress of bridge plating constructs. Finite element models were developed with variations in inner working length, plate‐bone offset, fracture gap size, and loading type and magnitudes. Experiments with synthetic bones were conducted in parallel to support model credibility. Analytical models were also developed based on beam bending and torsion of the plate, assuming rigidity outside the inner working length. Finite element and experimental results of axial and torsional loading scenarios without plate‐bone contact confirmed linear relationships between inner working length and interfragmentary motion. Analytical predictions of interfragmentary motion showed very good agreement with the finite element simulations in these scenarios. Conversely, in cases with plate‐bone contact, a shorter effective working length was formed, and results were dependent on additional variables such as fracture gap. The study shows how the mechanics of bridge plating can be understood and predicted based on beam theory up to the point of plate‐bone contact, and how interfragmentary motions and maximum plate stresses are influenced by the interaction of surgical variables in the presence of plate‐bone contact.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Bone PlatesFracture Fixation, InternalBiomechanical PhenomenaFinite Element AnalysisHumansComputer SimulationStress, Mechanical

Stichwörter der Autor:innen

beam bending modelbiomechanicsbridge platingbridge spanfinite element analysisfracture fixationfracture plateinterfragmentary motionplate clearanceplate working length

Autor:innen und Institutionen

  • Department of Orthopaedics and Rehabilitation, Penn State College of Medicine, Hershey, Pennsylvania, USA.
  • Department of Mechanical Engineering, The Pennsylvania State University, University Park, Pennsylvania, USA.

ORCID-Profile: Gregory S Lewis

Förderung

  • NIBIB NIH HHS
  • This study was supported by the National Institute of Biomedical Imaging and Bioengineering of the National Institutes of Health under award number R01EB029207.

Zitieren

APA

Koroneos, Z. A., Wee, H., Reid, J. S., & Lewis, G. S. (2025). Effects of Plate‐Bone Contact on Bridge Plate Fracture Fixation Biomechanics: Computational, Experimental, and Analytical Modeling. Journal of Orthopaedic Research, 43(9), 1606-1618. https://doi.org/10.1002/jor.26114

Vancouver

Koroneos ZA, Wee H, Reid JS, Lewis GS. Effects of Plate‐Bone Contact on Bridge Plate Fracture Fixation Biomechanics: Computational, Experimental, and Analytical Modeling. Journal of Orthopaedic Research. 2025;43(9):1606-1618. doi:10.1002/jor.26114

BibTeX
@article{Koroneos2025,
  author = {Koroneos, Zachary A and Wee, Hwabok and Reid, J Spence and Lewis, Gregory S},
  title = {Effects of Plate‐Bone Contact on Bridge Plate Fracture Fixation Biomechanics: Computational, Experimental, and Analytical Modeling},
  journal = {Journal of Orthopaedic Research},
  year = {2025},
  volume = {43},
  number = {9},
  pages = {1606--1618},
  doi = {10.1002/jor.26114}
}
Infokarte | EUVIMED

Artikeldaten derzeit nicht verfügbar.

Recherche