EUVIMEDEUVIMED entdecken
Crossref

Variation in Mechanical Properties of 5.5 mm Cobalt Chromium and Titanium Spinal Rods Across Suppliers

Vidyadhar V Upasani iD, Dylan G Kluck iD, Christine L Farnsworth iD, Naman U Shah iD, Burt Yaszay iD, Jason P Caffrey iD, Peter O Newton iD

Journal of Orthopaedic Research · 2025-08 · 43 (8) · 1493-1500

DOI: 10.1002/jor.26107 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Orthopaedic Research, online erschienen am 25.05.2025. Verfasst von Vidyadhar V Upasani und 6 weiteren Autor:innen. Beteiligte Einrichtung: University of California San Diego, San Diego, California, USA. Hauptthemen laut MEDLINE: Titanium, Chromium Alloys. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 20 Literaturangaben. Gefördert von: Funds were received for this study from OrthoPediatrics Corp. Spinal rods were provided by Alphatec Spine Inc., DePuy Synthes, K2M, NuVasive Inc., and OrthoPed….

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cobalt chromium (CoCr) and titanium (Ti) alloys are popular spinal rod choices due to biocompatibility, less imaging artifact than stainless steel, and greater corrosion resistance. This study assesses the mechanical behavior in bending of commercially available 5.5 mm diameter CoCr and Ti spinal rods in a four‐point bending configuration. For each supplier, rod segments were loaded to 20 mm of deflection with continuous load and displacement recording. Rod mechanical properties were calculated. Suppliers were compared by ANOVA, with post hoc pairwise comparisons. For CoCr rods, flexural modulus and flexural stiffness varied across suppliers with maximum differences of 18.0 GPa and 47.0 N/mm, respectively, representing 11% and 15% variation. Range for CoCr rod yield load was 780–1004 N (29% variation), yield displacement was 2.3–2.8 mm, elastic displacement was 2.2–2.7 mm, and maximum load was 1791–2181 N, representing 22% variation. For Ti rods, flexural modulus and flexural stiffness varied across suppliers with maximum differences of 7.3 GPa and 24.3 N/mm, respectively, representing 9% and 14% variation. Range for Ti rod yield load was 1054–1207 N (14% variation), yield displacement was 5.9–7.0 mm, elastic displacement was 5.8–6.9 mm, and maximum load was 1515–1678 N, representing 11% variation. There is substantial variation in mechanical behavior in bending of CoCr and Ti rods (5.5 mm diameter) amongst suppliers, suggesting that they are not mechanically equivalent. Surgeons must ensure that the mechanical properties of a particular rod meet the requirements of the surgical correction required.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

TitaniumChromium AlloysMaterials TestingHumans

Stichwörter der Autor:innen

bending mechanicsscoliosisspinal fusionspine deformitysurgical instrumentation

Substanzen

TitaniumChromium Alloys

Autor:innen und Institutionen

  • University of California San Diego, San Diego, California, USA.
  • Rady Children's Hospital-San Diego, San Diego, California, USA.

ORCID-Profile: Vidyadhar V Upasani, Dylan G Kluck, Christine L Farnsworth, Naman U Shah, Burt Yaszay, Jason P Caffrey, Peter O Newton

Förderung

  • Funds were received for this study from OrthoPediatrics Corp. Spinal rods were provided by Alphatec Spine Inc., DePuy Synthes, K2M, NuVasive Inc., and OrthoPed…

Zitieren

APA

Upasani, V. V., Kluck, D. G., Farnsworth, C. L., Shah, N. U., Yaszay, B., Caffrey, J. P., & Newton, P. O. (2025). Variation in Mechanical Properties of 5.5 mm Cobalt Chromium and Titanium Spinal Rods Across Suppliers. Journal of Orthopaedic Research, 43(8), 1493-1500. https://doi.org/10.1002/jor.26107

Vancouver

Upasani VV, Kluck DG, Farnsworth CL, Shah NU, Yaszay B, Caffrey JP, et al. Variation in Mechanical Properties of 5.5 mm Cobalt Chromium and Titanium Spinal Rods Across Suppliers. Journal of Orthopaedic Research. 2025;43(8):1493-1500. doi:10.1002/jor.26107

BibTeX
@article{Upasani2025,
  author = {Upasani, Vidyadhar V and Kluck, Dylan G and Farnsworth, Christine L and Shah, Naman U and Yaszay, Burt and Caffrey, Jason P and Newton, Peter O},
  title = {Variation in Mechanical Properties of 5.5 mm Cobalt Chromium and Titanium Spinal Rods Across Suppliers},
  journal = {Journal of Orthopaedic Research},
  year = {2025},
  volume = {43},
  number = {8},
  pages = {1493--1500},
  doi = {10.1002/jor.26107}
}
Kostenlos starten →