EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

In silico analysis of rib force distribution in postscapulothoracic arthrodesis model

Lercan Aslan, Omer Subasi iD, Cemil Cihad Gedik iD, Olgar Birsel, Ismail Lazoglu iD, Mehmet Demirhan, Ilker Eren

Journal of Orthopaedic Research · 2024

DOI: 10.1002/jor.25771 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Orthopaedic Research, 2024. Verfasst von Lercan Aslan und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthopaedics and Traumatology, Koc University School of Medicine, Istanbul, Turkey. Hauptthemen laut MEDLINE: Muscular Dystrophy, Facioscapulohumeral, Shoulder Joint. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Scapulothoracic arthrodesis (STA) is carried out by fixing the scapula to thoracic ribs which in turn allows the patient suffering from Facioscapulohumeral Muscular Dystrophy to carry out shoulder‐joint dependent activities of daily living. A biomechanical analysis of this procedure has not been conducted in the literature and, for the first time, this study investigates the finite element calculated glenohumeral‐applied load distributions on ribs by creating a post‐STA model. Three loading directions on the glenohumeral joint are designated: anterior‐posterior, superior‐inferior, and lateral‐medial. Reaction forces on the ribs are calculated based on the glenoid force percent. Simulations are repeated by removing a singular rib contact to observe the change in force distributions in the case of missing levels or failed bonding as well as the impact of clavicle osteotomy. Total load distribution is observed highest at T2 followed by T3 and T6. In the T2 missing scenario, total loads on T3 and T4 increase. In the T4 missing case, the most affected level is T3. In the T6 missing scenario, total loads on T5 and T7 increase. In the clavicular osteotomy scenario, all levels' loads increase; the highest is recorded in T7 by 460%, followed by T5, T4, T2, T6, and T3. While all levels contribute to fixation strength, T2 is subjected to the highest loads, and, in the missing level scenarios, the loads are tolerated sufficiently by the remaining levels. Missing T4 scenario has the least effect on the system, which is interpreted as potentially the only skippable level of fixation. Clavicular osteotomy has the highest effect on the arthrodesis site.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Muscular Dystrophy, FacioscapulohumeralShoulder JointHumansActivities of Daily LivingArthrodesisRibsScapula

Stichwörter der Autor:innen

Facioscapulohumeral Muscular Dystrophybiomechanical studyfinite elementscapulothoracic arthrodesis

Autor:innen und Institutionen

  • Department of Orthopaedics and Traumatology, Koc University School of Medicine, Istanbul, Turkey.
  • Foot & Ankle Research and Innovation Laboratory, Department of Orthopaedic Surgery, Massachusetts General Hospital, Harvard Medical School, Boston, Massachusetts, USA.
  • Manufacturing and Automation Research Center, Koc University, Istanbul, Turkey.

ORCID-Profile: Omer Subasi, Cemil Cihad Gedik, Ismail Lazoglu

Zitieren

APA

Aslan, L., Subasi, O., Gedik, C. C., Birsel, O., Lazoglu, I., Demirhan, M., & Eren, I. (2024). In silico analysis of rib force distribution in postscapulothoracic arthrodesis model. Journal of Orthopaedic Research. https://doi.org/10.1002/jor.25771

Vancouver

Aslan L, Subasi O, Gedik CC, Birsel O, Lazoglu I, Demirhan M, et al. In silico analysis of rib force distribution in postscapulothoracic arthrodesis model. Journal of Orthopaedic Research. 2024. doi:10.1002/jor.25771

BibTeX
@article{Aslan2024,
  author = {Aslan, Lercan and Subasi, Omer and Gedik, Cemil Cihad and Birsel, Olgar and Lazoglu, Ismail and Demirhan, Mehmet and Eren, Ilker},
  title = {In silico analysis of rib force distribution in postscapulothoracic arthrodesis model},
  journal = {Journal of Orthopaedic Research},
  year = {2024},
  doi = {10.1002/jor.25771}
}
Kostenlos starten →