Simulation Modeling of Ferroelectric‐Gated InSe 2D ‐ HEMT With Enhanced Electrostatic Control and 2DEG Engineering Towards Biosensor Applications
International Journal of Numerical Modelling: Electronic Networks, Devices and Fields · 2026-07 · 39 (4)
DOI: 10.1002/jnm.70186 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Numerical Modelling: Electronic Networks, Devices and Fields, online erschienen am 30.06.2026. Verfasst von E. Raghuveera und 5 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Gefördert von: Science and Engineering Research Board.
Abstract (Originalsprache)
We present a ferroelectric‐gated 2D material‐based high electron mobility transistor (HEMT) that provides an innovative solution for the challenges associated with the electrostatic control‚ the carrier density and the power performance of the conventional 2D FETs and III‐V HEMTs. The device employs an atomically thin monolayer InSe channel and a ferroelectric HfO 2 high‐k gate stack that exploits the negative capacitance effect of ferroelectrics to achieve strong charge control and voltage gain for the 2D channel. Unlike the polarizations in conventional polarization‐induced HEMTs‚ the polarization created by the ferroelectric leads to the formation of a high carrier density 2DEG in an atomically thin channel. The electrostatics‚ transport‚ and RF performance of the device are modeled using detailed TCAD simulations. The simulated device has a positive threshold voltage (~0.35 V)‚ allowing it to operate in the normally‐OFF regime. The simulated 2DEG has a charge density of ~9 × 10 12 cm −2 and an electron mobility of ~1000 cm 2 /V‐s. We show peak transconductance values of ~500 mS/mm‚ low OFF‐state leakage current densities below 10 −12 A‚ improved subthreshold behaviors approaching sub‐thermionic switching‚ and excellent scalability‚ suppression of short‐channel effects‚ and good electrostatic gate control through the combined effect of the ferroelectric polarization and the 2D confinement mechanisms. Thus‚ the proposed ferroelectric‐assisted 2D HEMT overcomes the issue of conventional 2D FET and III‐V HEMT both the carrier density and gate control are improved simultaneously with low‐power consumption. This makes the ferroelectric‐assisted 2D HEMT a good candidate for next‐generation Nanoelectronic‚ RF and biosensing applications.
Förderung
- Science and Engineering Research Board
Zitieren
APA
Raghuveera, E., Kar, P., Kumar, N., Lenka, T. R., Choudhary, S., & Nguyen, H. P. T. (2026). Simulation Modeling of Ferroelectric‐Gated InSe 2D ‐ HEMT With Enhanced Electrostatic Control and 2DEG Engineering Towards Biosensor Applications. International Journal of Numerical Modelling: Electronic Networks, Devices and Fields, 39(4). https://doi.org/10.1002/jnm.70186
Vancouver
Raghuveera E, Kar P, Kumar N, Lenka TR, Choudhary S, Nguyen HPT. Simulation Modeling of Ferroelectric‐Gated InSe 2D ‐ HEMT With Enhanced Electrostatic Control and 2DEG Engineering Towards Biosensor Applications. International Journal of Numerical Modelling: Electronic Networks, Devices and Fields. 2026;39(4). doi:10.1002/jnm.70186
BibTeX
@article{Raghuveera2026,
author = {Raghuveera, E. and Kar, Padmakshya and Kumar, Nitish and Lenka, Trupti Ranjan and Choudhary, Sudhanshu and Nguyen, Hieu Pham Trung},
title = {Simulation Modeling of Ferroelectric‐Gated InSe 2D ‐ HEMT With Enhanced Electrostatic Control and 2DEG Engineering Towards Biosensor Applications},
journal = {International Journal of Numerical Modelling: Electronic Networks, Devices and Fields},
year = {2026},
volume = {39},
number = {4},
doi = {10.1002/jnm.70186}
}
EUVIMED