EUVIMEDEUVIMED entdecken
Crossref

Amoxicillin adsorption onto oil palm trunk‐derived activated carbon: synthesis optimization, modelling of mass transfer and ultrasonic regeneration

Mohamad Firdaus Mohamad Yusop, Mohamad Hafiz Baharudin, Md Mamoon Rashid, Mohammad Mahtab Alam, Mohd Azmier Ahmad

Journal of Chemical Technology & Biotechnology · 2025-06 · 100 (6) · 1310-1327

DOI: 10.1002/jctb.7864 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Chemical Technology & Biotechnology, online erschienen am 10.04.2025. Verfasst von Mohamad Firdaus Mohamad Yusop und 4 weiteren Autor:innen. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 79 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

BACKGROUND Antibiotics such as amoxicillin (AMC) can persist in the environment due to their stable molecular structures. This study aimed to (i) optimize the synthesis of oil palm trunk‐based activated carbon (OPTAC) for AMC removal, (ii) model the adsorption process using the mass transfer model (MTM) and (iii) evaluate OPTAC regeneration through ultrasonic washing. OPTAC was synthesized using potassium hydroxide activation followed by carbon dioxide treatment. RESULTS Response surface methodology (RSM) identified optimal synthesis conditions at 343 W, 12.87 min and an impregnation ratio of 2.00 g g −1 . Under these conditions, the predicted AMC uptake was 146.44 mg g −1 (actual: 154.15 mg g −1 ; 5.00% error), and the predicted OPTAC yield was 42.78% (actual: 41.19%; 3.86% error). The AMC–OPTAC adsorption followed the Freundlich isotherm, with a Langmuir capacity ( Q m ) of 238.67 mg g −1 . Kinetic analysis revealed that the pseudo‐first‐order model best described the system. MTM analysis yielded an average mass transfer constant ( k m ) of 0.23 mg m L −1 h −1 , rate constant ( k MTM ) of 0.00051 h −1 and estimated surface area ( a MTM ) of 611.34 m 2 g −1 , closely matching the measured mesopore surface area (647.82 m 2 g −1 ; 5.63% error). Thermodynamic analysis confirmed physisorption as the dominant mechanism, with spontaneous and endothermic behavior. In regeneration studies, ultrasonic washing outperformed microwave reactivation, maintaining AMC removal efficiency and OPTAC yield above 50% for five cycles, compared to three with microwave treatment. CONCLUSIONS RSM successfully optimized AMC removal and OPTAC yield, while the MTM effectively predicted the active surface area involved in the adsorption process. © 2025 Society of Chemical Industry (SCI).

Zitieren

APA

Yusop, M. F. M., Baharudin, M. H., Rashid, M. M., Alam, M. M., & Ahmad, M. A. (2025). Amoxicillin adsorption onto oil palm trunk‐derived activated carbon: synthesis optimization, modelling of mass transfer and ultrasonic regeneration. Journal of Chemical Technology & Biotechnology, 100(6), 1310-1327. https://doi.org/10.1002/jctb.7864

Vancouver

Yusop MFM, Baharudin MH, Rashid MM, Alam MM, Ahmad MA. Amoxicillin adsorption onto oil palm trunk‐derived activated carbon: synthesis optimization, modelling of mass transfer and ultrasonic regeneration. Journal of Chemical Technology & Biotechnology. 2025;100(6):1310-1327. doi:10.1002/jctb.7864

BibTeX
@article{Yusop2025,
  author = {Yusop, Mohamad Firdaus Mohamad and Baharudin, Mohamad Hafiz and Rashid, Md Mamoon and Alam, Mohammad Mahtab and Ahmad, Mohd Azmier},
  title = {Amoxicillin adsorption onto oil palm trunk‐derived activated carbon: synthesis optimization, modelling of mass transfer and ultrasonic regeneration},
  journal = {Journal of Chemical Technology & Biotechnology},
  year = {2025},
  volume = {100},
  number = {6},
  pages = {1310--1327},
  doi = {10.1002/jctb.7864}
}
Kostenlos starten →