EUVIMEDEUVIMED entdecken
Crossref

Formation of a Hard Photocatalytic Antibacterial TiO 2 Layer on Ti Surface via Anodization in Hot Nitrate/Ethylene Glycol Electrolyte

Naofumi Ohtsu iD, Ryota Kawakami iD, Mitsuhiro Hirano iD

Journal of Biomedical Materials Research Part B: Applied Biomaterials · 2025

DOI: 10.1002/jbm.b.35658 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2025. Verfasst von Naofumi Ohtsu und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Engineering, Kitami Institute of Technology, Kitami, Hokkaido, Japan. Hauptthemen laut MEDLINE: Titanium, Anti-Bacterial Agents, Ethylene Glycol, Escherichia coli. Die Arbeit nennt 34 Literaturangaben. Gefördert von: Japan Science and Technology Agency.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Preventing bacterial infections on Ti‐based medical products is crucial, driving the need for durable antibacterial surfaces with enhanced mechanical strength and photocatalytic activity. This study introduces an anodization process for fabricating a hard barrier‐type TiO 2 layer on a Ti substrate with visible‐light‐responsive photocatalytic activity. The core technology involves using an electrolyte comprising nitrate and ethylene glycol maintained at a high temperature to improve the layer hardness and photocatalytic performance. The layer characteristics, including thickness, crystallinity, and density, sensitively varied with increasing electrolyte temperature. For instance, raising the temperature to 100°C increased the layer thickness and density. By contrast, the thickness decreased beyond 100°C, leading to the deterioration of photocatalytic performance. Using ethylene glycol containing 100 mM nitrate maintained around 100°C was appropriate for maximizing layer hardness and photocatalytic performance. The resulting monolithic TiO 2 layer exhibited a hardness of ~450 HV, approximately twice that of the Ti substrate. Moreover, it effectively reduced the number of living Escherichia coli to ~4/100 under ultraviolet (UV) light and ~4/10 under visible light after 4 h of illumination. These results provide a guideline for obtaining a semi‐permanent antibacterial medium through anodization.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

TitaniumAnti-Bacterial AgentsEthylene GlycolEscherichia coliNitratesCoated Materials, BiocompatibleCatalysisUltraviolet RaysSurface PropertiesElectrolytesElectrodes

Stichwörter der Autor:innen

N‐doped TiO2anodizationantibacterialmedical implantsurface modification

Substanzen

Titaniumtitanium dioxideAnti-Bacterial AgentsEthylene GlycolNitratesElectrolytesCoated Materials, Biocompatible

Autor:innen und Institutionen

  • Faculty of Engineering, Kitami Institute of Technology, Kitami, Hokkaido, Japan.

ORCID-Profile: Naofumi Ohtsu, Ryota Kawakami, Mitsuhiro Hirano

Förderung

  • Japan Science and Technology Agency

Zitieren

APA

Ohtsu, N., Kawakami, R., & Hirano, M. (2025). Formation of a Hard Photocatalytic Antibacterial TiO 2 Layer on Ti Surface via Anodization in Hot Nitrate/Ethylene Glycol Electrolyte. Journal of Biomedical Materials Research Part B: Applied Biomaterials. https://doi.org/10.1002/jbm.b.35658

Vancouver

Ohtsu N, Kawakami R, Hirano M. Formation of a Hard Photocatalytic Antibacterial TiO 2 Layer on Ti Surface via Anodization in Hot Nitrate/Ethylene Glycol Electrolyte. Journal of Biomedical Materials Research Part B: Applied Biomaterials. 2025. doi:10.1002/jbm.b.35658

BibTeX
@article{Ohtsu2025,
  author = {Ohtsu, Naofumi and Kawakami, Ryota and Hirano, Mitsuhiro},
  title = {Formation of a Hard Photocatalytic Antibacterial TiO 2 Layer on Ti Surface via Anodization in Hot Nitrate/Ethylene Glycol Electrolyte},
  journal = {Journal of Biomedical Materials Research Part B: Applied Biomaterials},
  year = {2025},
  doi = {10.1002/jbm.b.35658}
}
Kostenlos starten →