Mechanical Characterization of Amniotic‐Based Scaffolds Containing Silk Fibroin and Sodium Alginate Nanofibers
Journal of Biomedical Materials Research Part B: Applied Biomaterials · 2025
DOI: 10.1002/jbm.b.35539 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2025. Verfasst von Hassan Beheshti Seresht und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Industrial Engineering, University of Pittsburgh, Pittsburgh, Pennsylvania, USA. Hauptthemen laut MEDLINE: Alginates, Fibroins, Nanofibers, Amnion. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 35 Literaturangaben.
Abstract (Originalsprache)
Due to its availability and biocompatibility, the human amniotic membrane (hAM) is being investigated by a large number of researchers with the goal of gaining a better understanding of the materials' mechanical behavior and structural integrity and optimizing them for various Tissue Engineering applications. In this research, biopolymers sodium alginate (SA) and silk fibroin (SF) were electrospun onto a decellularized hAM, resulting in two types of hybrid scaffolds: hAM/SF and hAM/SF/SA. The mechanical characteristics of these nanofibers were then analyzed to guide scaffold optimization for applications using these materials. Two mechanical experiments were conducted; uniaxial tension in both wet and dry configurations, and stress‐relaxation tests. According to the results, the mechanical characteristics of the manufactured materials were significantly different from those of the amniotic membrane, indicating the effect of novel materials. Tensile testing in the dry condition revealed a small variation in stiffness between the amniotic membrane and the new nanofibers. Simultaneously, a significant reduction in maximum tension and stretch was observed in the aforementioned materials compared to amniotic matrices. In addition, tensile testing in a wet configuration indicated that the new nanofibers are stronger and stiffer than amniotic membrane but less stretchy, owing to the improved mechanical properties of SF, which can be considered as the membrane's or tissue's load‐bearer. The addition of SF increases the stiffness and durability of the fabricated scaffold. In addition, when compared to the amniotic membrane, relaxation tests revealed significant differences in peak tension rather than equilibrium state for the novel nanofibers in wet conditions. The results of this investigation will enable us to have a comprehensive grasp of the mechanical properties of freshly created wound dressings.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Industrial Engineering, University of Pittsburgh, Pittsburgh, Pennsylvania, USA.
- School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran, Iran.
- School of Biomedical Engineering, McMaster University, Hamilton, Ontario, Canada.
ORCID-Profile: Hassan Beheshti Seresht, Rouhollah Mehdinavaz Aghdam
Zitieren
APA
Beheshti Seresht, H., Akhlaghi, P., Ashouri Sharafshadeh, S., Aghajanzadeh, M. S., & Mehdinavaz Aghdam, R. (2025). Mechanical Characterization of Amniotic‐Based Scaffolds Containing Silk Fibroin and Sodium Alginate Nanofibers. Journal of Biomedical Materials Research Part B: Applied Biomaterials. https://doi.org/10.1002/jbm.b.35539
Vancouver
Beheshti Seresht H, Akhlaghi P, Ashouri Sharafshadeh S, Aghajanzadeh MS, Mehdinavaz Aghdam R. Mechanical Characterization of Amniotic‐Based Scaffolds Containing Silk Fibroin and Sodium Alginate Nanofibers. Journal of Biomedical Materials Research Part B: Applied Biomaterials. 2025. doi:10.1002/jbm.b.35539
BibTeX
@article{BeheshtiSeresht2025,
author = {Beheshti Seresht, Hassan and Akhlaghi, Parisa and Ashouri Sharafshadeh, Sina and Aghajanzadeh, Mohamad Sadegh and Mehdinavaz Aghdam, Rouhollah},
title = {Mechanical Characterization of Amniotic‐Based Scaffolds Containing Silk Fibroin and Sodium Alginate Nanofibers},
journal = {Journal of Biomedical Materials Research Part B: Applied Biomaterials},
year = {2025},
doi = {10.1002/jbm.b.35539}
}
EUVIMED