EUVIMEDEUVIMED entdecken
Crossref

Exploring the biodegradability of candidate metallic intravascular stent materials using X‐ray microfocus computed tomography: An in vitro study

Lisa Leyssens iD, Noémie Lapraille, Grzegorz Pyka, Pascal J Jacques, Sandrine Horman, Jeremy Goldman, Greet Kerckhofs

Journal of Biomedical Materials Research Part B: Applied Biomaterials · 2024

DOI: 10.1002/jbm.b.35452 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Biomedical Materials Research Part B: Applied Biomaterials, 2024. Verfasst von Lisa Leyssens und 6 weiteren Autor:innen. Beteiligte Einrichtung: Mechatronic, Electrical Energy and Dynamic Systems, Institute of Mechanics, Materials, and Civil Engineering, UCLouvain, Louvain-la-Neuve, Belgium. Hauptthemen laut MEDLINE: X-Ray Microtomography, Stents, Absorbable Implants, Materials Testing. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 48 Literaturangaben. Gefördert von: FSR project - Projets Fonds de Recherche Spécial Jeunes Académiques - Fédération Wallonie-Bruxelles, Action de Recherche Concertée, SBO project of the Research Foundation Flanders.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In vitro testing for evaluating degradation mode and rate of candidate biodegradable metals to be used as intravascular stents is crucial before going to in vivo animal models. In this study, we show that X‐ray microfocus computed tomography (microCT) presents a key added value to visualize degradation mode and to evaluate degradation rate and material surface properties in 3D and at high resolution of large regions of interest. The in vitro degradation behavior of three candidate biodegradable stent materials was evaluated: pure iron (Fe), pure zinc (Zn), and a quinary Zn alloy (ZnAgCuMnZr). These metals were compared to a reference biostable cobaltchromium (CoCr) alloy. To compare the degradation mode and degradation rate evaluated with microCT, scanning electron microscopy (SEM) and inductively‐coupled plasma (ICP) were included. We confirmed that Fe degrades very slowly but with desirable uniform surface corrosion. Zn degrades faster but exhibits localized deep pitting corrosion. The Zn alloy degrades at a similar rate as the pure Zn, but more homogeneously. However, the formation of deep internal dendrites was observed. Our study provides a detailed microCT‐based comparison of essential surface and corrosion properties, with a structural characterization of the corrosion behavior, of different candidate stent materials in 3D in a non‐destructive way.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

X-Ray MicrotomographyStentsAbsorbable ImplantsMaterials TestingZincAlloysIronCorrosion

Stichwörter der Autor:innen

biodegradable stenthigh‐resolution microCTin vitro static immersion testingmetallic alloysurface properties

Substanzen

ZincAlloysIron

Autor:innen und Institutionen

  • Mechatronic, Electrical Energy and Dynamic Systems, Institute of Mechanics, Materials, and Civil Engineering, UCLouvain, Louvain-la-Neuve, Belgium.
  • Pole of Morphology, Institute of Experimental and Clinical Research, UCLouvain, Woluwe-Saint-Lambert, Belgium.
  • Materials and Process Engineering, Institute of Mechanics, Materials, and Civil Engineering, UCLouvain, Louvain-la-Neuve, Belgium.
  • Pole of Cardiovascular Research, Institute of Experimental and Clinical Research, UCLouvain, Woluwe-Saint-Lambert, Belgium.
  • Department of Biomedical Engineering, Michigan Technological University, Houghton, Michigan, USA.
  • Department of Materials Engineering, KU Leuven, Leuven, Belgium.

ORCID-Profile: Lisa Leyssens

Förderung

  • FSR project - Projets Fonds de Recherche Spécial Jeunes Académiques - Fédération Wallonie-Bruxelles
  • Action de Recherche Concertée
  • SBO project of the Research Foundation Flanders
  • Hercules Foundation
  • Fonds de la Recherche Scientifique

Zitieren

APA

Leyssens, L., Lapraille, N., Pyka, G., Jacques, P. J., Horman, S., Goldman, J., & Kerckhofs, G. (2024). Exploring the biodegradability of candidate metallic intravascular stent materials using X‐ray microfocus computed tomography: An in vitro study. Journal of Biomedical Materials Research Part B: Applied Biomaterials. https://doi.org/10.1002/jbm.b.35452

Vancouver

Leyssens L, Lapraille N, Pyka G, Jacques PJ, Horman S, Goldman J, et al. Exploring the biodegradability of candidate metallic intravascular stent materials using X‐ray microfocus computed tomography: An in vitro study. Journal of Biomedical Materials Research Part B: Applied Biomaterials. 2024. doi:10.1002/jbm.b.35452

BibTeX
@article{Leyssens2024,
  author = {Leyssens, Lisa and Lapraille, Noémie and Pyka, Grzegorz and Jacques, Pascal J and Horman, Sandrine and Goldman, Jeremy and Kerckhofs, Greet},
  title = {Exploring the biodegradability of candidate metallic intravascular stent materials using X‐ray microfocus computed tomography: An in vitro study},
  journal = {Journal of Biomedical Materials Research Part B: Applied Biomaterials},
  year = {2024},
  doi = {10.1002/jbm.b.35452}
}
Kostenlos starten →