EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

In vitro cytocompatibility and antibacterial studies on biodegradable Zn alloys supplemented by a critical assessment of direct contact cytotoxicity assay

Maria Wątroba iD, Wiktor Bednarczyk iD, Piotr K Szewczyk iD, Jakub Kawałko iD, Krzysztof Mech iD, Alina Grünewald, Irem Unalan iD, Nicola Taccardi iD, Gabriela Boelter iD, Manuel Banzhaf iD, Caroline Hain iD, Piotr Bała iD und 1 weitere

Journal of Biomedical Materials Research Part B: Applied Biomaterials · 2023-02 · 111 (2) · 241-260

DOI: 10.1002/jbm.b.35147 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Biomedical Materials Research Part B: Applied Biomaterials, online erschienen am 26.08.2022. Verfasst von Maria Wątroba und 12 weiteren Autor:innen. Beteiligte Einrichtung: Laboratory for Mechanics of Materials and Nanostructures, Empa, Swiss Federal Laboratories for Materials Science and Technology, Thun, Switzerland. Hauptthemen laut MEDLINE: Alloys, Absorbable Implants. Die Arbeit wurde bisher 64-mal zitiert (Crossref) und nennt 95 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Narodowe Centrum Nauki.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In vitro cytotoxicity assessment is indispensable in developing new biodegradable implant materials. Zn, which demonstrates an ideal corrosion rate between Mg‐ and Fe‐based alloys, has been reported to have excellent in vivo biocompatibility . Therefore, modifications aimed at improving Zn's mechanical properties should not degrade its biological response. As sufficient strength, ductility and corrosion behavior required of load‐bearing implants has been obtained in plastically deformed Zn‐3Ag‐0.5Mg, the effect of simultaneous Ag and Mg additions on in vitro cytocompatibility and antibacterial properties was studied, in relation to Zn and Zn‐3Ag. Direct cell culture on samples and indirect extract‐based tests showed almost no significant differences between the tested Zn‐based materials. The diluted extracts of Zn, Zn‐3Ag, and Zn‐3Ag‐0.5Mg showed no cytotoxicity toward MG‐63 cells at a concentration of ≤12.5%. The cytotoxic effect was observed only at high Zn 2+ ion concentrations and when in direct contact with metallic samples. The highest LD 50 (lethal dose killing 50% of cells) of 13.4 mg/L of Zn 2+ ions were determined for the Zn‐3Ag‐0.5Mg. Similar antibacterial activity against Escherichia coli and Staphylococcus aureus was observed for Zn and Zn alloys, so the effect is attributed mainly to the released Zn 2+ ions exhibiting bactericidal properties. Most importantly, our experiments indicated the limitations of water‐soluble tetrazolium salt‐based cytotoxicity assays for direct tests on Zn‐based materials. The discrepancies between the WST‐8 assay and SEM observations are attributed to the interference of Zn 2+ ions with tetrazolium salt, therefore favoring its transformation into formazan, giving false cell viability quantitative results.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

AlloysAbsorbable ImplantsMaterials TestingCell LineCorrosionAnti-Bacterial AgentsEscherichia coliIonsZincTetrazolium SaltsBiocompatible Materials

Stichwörter der Autor:innen

Zn alloysantibacterial propertiesbiodegradationcytotoxicitytetrazolium salt-based assay

Substanzen

AlloysAnti-Bacterial AgentsIonsZincTetrazolium SaltsBiocompatible Materials

Autor:innen und Institutionen

  • Laboratory for Mechanics of Materials and Nanostructures, Empa, Swiss Federal Laboratories for Materials Science and Technology, Thun, Switzerland.
  • Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, Krakow, Poland.
  • Faculty of Materials Science and Engineering, Warsaw University of Technology, Warsaw, Poland.
  • Academic Centre for Materials and Nanotechnology, AGH University of Science and Technology, Krakow, Poland.
  • Department of Materials Science and Engineering, Institute of Biomaterials, University of Erlangen-Nuremberg, Erlangen, Germany.
  • Institute of Chemical Reaction Engineering, University of Erlangen-Nuremberg, Erlangen, Germany.

ORCID-Profile: Maria Wątroba, Wiktor Bednarczyk, Piotr K Szewczyk, Jakub Kawałko, Krzysztof Mech, Irem Unalan, Nicola Taccardi, Gabriela Boelter, Manuel Banzhaf, Caroline Hain, Piotr Bała, Aldo R Boccaccini

Förderung

  • Narodowe Centrum Nauki

Zitieren

APA

Wątroba, M., Bednarczyk, W., Szewczyk, P. K., Kawałko, J., Mech, K., Grünewald, A., Unalan, I., Taccardi, N., Boelter, G., Banzhaf, M., Hain, C., Bała, P., & Boccaccini, A. R. (2023). In vitro cytocompatibility and antibacterial studies on biodegradable Zn alloys supplemented by a critical assessment of direct contact cytotoxicity assay. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 111(2), 241-260. https://doi.org/10.1002/jbm.b.35147

Vancouver

Wątroba M, Bednarczyk W, Szewczyk PK, Kawałko J, Mech K, Grünewald A, et al. In vitro cytocompatibility and antibacterial studies on biodegradable Zn alloys supplemented by a critical assessment of direct contact cytotoxicity assay. Journal of Biomedical Materials Research Part B: Applied Biomaterials. 2023;111(2):241-260. doi:10.1002/jbm.b.35147

BibTeX
@article{Wtroba2023,
  author = {Wątroba, Maria and Bednarczyk, Wiktor and Szewczyk, Piotr K and Kawałko, Jakub and Mech, Krzysztof and Grünewald, Alina and Unalan, Irem and Taccardi, Nicola and Boelter, Gabriela and Banzhaf, Manuel and Hain, Caroline and Bała, Piotr and Boccaccini, Aldo R},
  title = {In vitro cytocompatibility and antibacterial studies on biodegradable Zn alloys supplemented by a critical assessment of direct contact cytotoxicity assay},
  journal = {Journal of Biomedical Materials Research Part B: Applied Biomaterials},
  year = {2023},
  volume = {111},
  number = {2},
  pages = {241--260},
  doi = {10.1002/jbm.b.35147}
}
Kostenlos starten →