Tunable Polycaprolactone‐Gelatin Methacryloyl Composites for Fused Deposition Modeling Musculoskeletal Scaffold Fabrication
Journal of Biomedical Materials Research Part A · 2026-11 · 114 (11)
DOI: 10.1002/jbm.a.70179 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Biomedical Materials Research Part A, online erschienen am 30.10.2026. Verfasst von Anthony An-Fa Dahm Chen und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthopaedic Surgery, Stanford University, Stanford, California, USA. Hauptthemen laut MEDLINE: Gelatin, Polyesters, Tissue Scaffolds, Mesenchymal Stem Cells. Die Arbeit nennt 43 Literaturangaben. Gefördert von: NIH HHS, Department of War, National Institutes of Health.
Abstract (Originalsprache)
The global musculoskeletal burden continues to outpace standard of care transplantation efforts and existing tissue engineering solutions, necessitating further development of scalable biomaterials. In this study, we introduce a novel synthesis of polycaprolactone‐gelatin methacryloyl (PCL‐GelMA) composite filament, compatible with standard fused deposition modeling (FDM) 3D printers, for scalable and customizable scaffold fabrication. By incorporating 15% and 30% (w/w) GelMA into a PCL matrix, we achieved tunable modulation of surface roughness, hydrophilicity, and degradation kinetics. Mechanical testing revealed nonlinear dependencies between GelMA content and tensile properties, suggesting that variation in GelMA particle size and distribution leads to a concentration‐dependent trade‐off between stiffness and structural integrity. Human mesenchymal stem cells (hMSCs) cultured on printed scaffolds maintained viability and proliferative capacity. By mitigating solvent toxicity through upstream processing, physically integrating constituents into a unified bulk matrix, and leveraging the accessibility of FDM printing, this material platform enables scalable translation and further biomaterial exploration.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Orthopaedic Surgery, Stanford University, Stanford, California, USA.
- Department of Bioengineering, Stanford University, Stanford, California, USA.
- Department of Mechanical Engineering, University of Texas at Dallas, Richardson, Texas, USA.
- Department of Mechanical Engineering, Stanford University, Stanford, California, USA.
- School of Medicine, Stanford University, Stanford, California, USA.
- Department of Materials Science and Engineering, Stanford University, Stanford, California, USA.
ORCID-Profile: Anthony An-Fa Dahm Chen, Philip James DePond, Richard Sammy Muniz, Andrea Sofia Flores Perez, Yunzhi Peter Yang
Förderung
- NIH HHS
- Department of War
- National Institutes of Health
- U.S. Department of War
Zitieren
APA
Chen, A. A. D., Li, J., DePond, P. J., Muniz, R. S., Perez, A. S. F., Lew, A. J., Gardner, M. J., Mohler, D. G., Maloney, W. J., & Yang, Y. P. (2026). Tunable Polycaprolactone‐Gelatin Methacryloyl Composites for Fused Deposition Modeling Musculoskeletal Scaffold Fabrication. Journal of Biomedical Materials Research Part A, 114(11). https://doi.org/10.1002/jbm.a.70179
Vancouver
Chen AAD, Li J, DePond PJ, Muniz RS, Perez ASF, Lew AJ, et al. Tunable Polycaprolactone‐Gelatin Methacryloyl Composites for Fused Deposition Modeling Musculoskeletal Scaffold Fabrication. Journal of Biomedical Materials Research Part A. 2026;114(11). doi:10.1002/jbm.a.70179
BibTeX
@article{Chen2026,
author = {Chen, Anthony An-Fa Dahm and Li, Jiannan and DePond, Philip James and Muniz, Richard Sammy and Perez, Andrea Sofia Flores and Lew, Adrian J and Gardner, Michael J and Mohler, David G and Maloney, William Joseph and Yang, Yunzhi Peter},
title = {Tunable Polycaprolactone‐Gelatin Methacryloyl Composites for Fused Deposition Modeling Musculoskeletal Scaffold Fabrication},
journal = {Journal of Biomedical Materials Research Part A},
year = {2026},
volume = {114},
number = {11},
doi = {10.1002/jbm.a.70179}
}
EUVIMED