Dual Modification of Collagen Hydrogels Using UVA ‐Riboflavin Crosslinking and Silk Fibroin Incorporation to Enhance Mechanical Properties, Stability, and Printability
Journal of Biomedical Materials Research Part A · 2026
DOI: 10.1002/jbm.a.70165 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Biomedical Materials Research Part A, 2026. Verfasst von Nithyashri Muthu Vijayan und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering and Sciences, Florida Institute of Technology, Melbourne, Florida, USA. Hauptthemen laut MEDLINE: Hydrogels, Riboflavin, Fibroins, Ultraviolet Rays. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NIH HHS, National Institutes of Health.
Abstract (Originalsprache)
Type I collagen is a biomaterial of preferred choice due to its biocompatibility, biodegradability, and ability to support cell adhesion and proliferation. However, the use of collagen hydrogels in tissue engineering (TE) is limited due to poor mechanical properties and low stability. This study introduces a novel dual‐modification strategy to enhance collagen properties by combining UVA‐mediated riboflavin/sodium persulfate (RF/SPS) photocrosslinking with the incorporation of unsonicated silk fibroin (SF), an approach not previously reported. Collagen hydrogels were fabricated in four variations: uncrosslinked collagen (UXL‐C), UVA‐mediated RF/SPS photocrosslinked collagen (XL‐C), SF incorporated UVA‐RF/SPS photocrosslinked collagen using two different collagen:SF ratios (XL‐CS 1:1 w/w) and (XL‐CS 1:2 w/w). Mechanical testing and stability results showed that combining UVA‐RF/SPS photocrosslinking and SF incorporation significantly enhanced ( p < 0.05) the compressive modulus and increased mass‐retention of collagen hydrogels suggesting that the addition of unsonicated SF improves the mechanical properties and stability of photochemically crosslinked collagen hydrogels. All hydrogel compositions exhibit shear‐thinning behavior demonstrating applicability for extrusion‐based 3D printing via Freeform Reversible Embedding of Suspended Hydrogels (FRESH)‐based methodology. 3D printed SF‐incorporated collagen constructs showed improved shape fidelity compared to constructs printed with collagen‐only inks. In vitro cell culture studies revealed that all hydrogel formulations supported cell viability and metabolic activity over 7 days of culture. Together, these findings demonstrate that combining UVA‐mediated RF/SPS photocrosslinking and unsonicated SF incorporation is a viable strategy to improve the mechanical properties, stability, and printability of collagen hydrogels for biomedical and TE applications.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Biomedical Engineering and Sciences, Florida Institute of Technology, Melbourne, Florida, USA.
- Human Organ Mimics Engineering (HOME) Lab, Centre for Biomaterials, Cellular and Molecular Theranostics, Vellore Institute of Technology, Vellore, Tamil Nadu, India.
- Department of Health Engineering, School of Engineering and Applied Sciences, SRM University-AP, Guntur, Andhra Pradesh, India.
- Department of Chemistry and Chemical Engineering, Florida Institute of Technology, Melbourne, Florida, USA.
ORCID-Profile: Diya Pillai Babu, Beste Caner, Rohin Shyam, Arunkumar Palaniappan, Vipuil Kishore
Förderung
- NIH HHS
- National Institutes of Health
Zitieren
APA
Vijayan, N. M., Babu, D. P., Caner, B., Shyam, R., Palaniappan, A., & Kishore, V. (2026). Dual Modification of Collagen Hydrogels Using UVA ‐Riboflavin Crosslinking and Silk Fibroin Incorporation to Enhance Mechanical Properties, Stability, and Printability. Journal of Biomedical Materials Research Part A. https://doi.org/10.1002/jbm.a.70165
Vancouver
Vijayan NM, Babu DP, Caner B, Shyam R, Palaniappan A, Kishore V. Dual Modification of Collagen Hydrogels Using UVA ‐Riboflavin Crosslinking and Silk Fibroin Incorporation to Enhance Mechanical Properties, Stability, and Printability. Journal of Biomedical Materials Research Part A. 2026. doi:10.1002/jbm.a.70165
BibTeX
@article{Vijayan2026,
author = {Vijayan, Nithyashri Muthu and Babu, Diya Pillai and Caner, Beste and Shyam, Rohin and Palaniappan, Arunkumar and Kishore, Vipuil},
title = {Dual Modification of Collagen Hydrogels Using UVA ‐Riboflavin Crosslinking and Silk Fibroin Incorporation to Enhance Mechanical Properties, Stability, and Printability},
journal = {Journal of Biomedical Materials Research Part A},
year = {2026},
doi = {10.1002/jbm.a.70165}
}
EUVIMED