EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Topology–Process Interactions During Fabrication Shape Triply Periodic Minimal Surface Microarchitecture and Osteogenic Outcomes in Melt‐Extruded Polycaprolactone Scaffolds

Baoyi Cai iD, Patrina S P Poh, Wing Lee Chan iD

Journal of Biomedical Materials Research Part A · 2026-11 · 114 (11)

DOI: 10.1002/jbm.a.70161 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Biomedical Materials Research Part A, online erschienen am 09.11.2026. Verfasst von Baoyi Cai und 2 weiteren Autor:innen. Beteiligte Einrichtung: Julius Wolff Institute, Berlin Institute of Health at Charité-Universitätsmedizin Berlin, Berlin, Germany. Hauptthemen laut MEDLINE: Polyesters, Osteogenesis, Tissue Scaffolds, Mesenchymal Stem Cells. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft, BMFTR; formerly BMBF, China Scholarship Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing enables bone scaffolds with customizable pore geometry and curvature. Although triply periodic minimal surface (TPMS) architectures can influence osteogenic differentiation, scaffold performance is often interpreted from CAD‐defined topology, while melt extrusion may generate distinct print‐realized microarchitectures. Here, polycaprolactone constructs were fabricated by melt extrusion‐based additive manufacturing as 2.5D discs printed with 200 or 400 μm nozzles to modulate strand‐scale print geometry and as 3D TPMS scaffolds in diamond, double diamond, and gyroid architectures. Murine D1 mesenchymal stromal cells were cultured under growth or osteogenic conditions and assessed by CCK‐8 metabolic activity, PicoGreen dsDNA quantification, alkaline phosphatase activity, Alizarin Red staining, and qRT‐PCR. In 2.5D cultures, S200 and S400 produced no significant differences in metabolic activity, dsDNA content, ALP activity, or mineralization, indicating that the tested differences in strand width and height did not measurably affect osteogenic outcomes. Micro‐CT analysis of 3D scaffolds showed architecture‐dependent differences in the printed microarchitecture under identical process conditions. DDia exhibited increased wall thickness, reduced pore separation, lower porosity, and higher scaffold surface density than Dia and Gyr. In 3D cultures, Dia and Gyr supported stronger osteogenic responses than DDia, while nonnormalized dsDNA data indicated that these differences were not simply explained by a major difference in total cell content. Gyr showed higher Sost expression, suggesting greater progression toward osteocyte maturation. These findings identify print‐realized microarchitecture as an important link between CAD‐defined TPMS topology and osteogenic outcome in melt‐extruded PCL scaffolds.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

PolyestersOsteogenesisTissue ScaffoldsMesenchymal Stem CellsAnimalsMiceSurface PropertiesPrinting, Three-DimensionalAlkaline PhosphataseCell DifferentiationCell Line

Stichwörter der Autor:innen

D1‐MSCsadditive manufacturing (AM)bone tissue engineeringin vitrotriply periodic minimal surface (TPMS)

Substanzen

PolyesterspolycaprolactoneAlkaline Phosphatase

Autor:innen und Institutionen

  • Julius Wolff Institute, Berlin Institute of Health at Charité-Universitätsmedizin Berlin, Berlin, Germany.
  • Berlin Institute of Health at Charité, Berlin, Germany.

ORCID-Profile: Baoyi Cai, Wing Lee Chan

Förderung

  • Deutsche Forschungsgemeinschaft
  • BMFTR; formerly BMBF
  • China Scholarship Council

Zitieren

APA

Cai, B., Poh, P. S. P., & Chan, W. L. (2026). Topology–Process Interactions During Fabrication Shape Triply Periodic Minimal Surface Microarchitecture and Osteogenic Outcomes in Melt‐Extruded Polycaprolactone Scaffolds. Journal of Biomedical Materials Research Part A, 114(11). https://doi.org/10.1002/jbm.a.70161

Vancouver

Cai B, Poh PSP, Chan WL. Topology–Process Interactions During Fabrication Shape Triply Periodic Minimal Surface Microarchitecture and Osteogenic Outcomes in Melt‐Extruded Polycaprolactone Scaffolds. Journal of Biomedical Materials Research Part A. 2026;114(11). doi:10.1002/jbm.a.70161

BibTeX
@article{Cai2026,
  author = {Cai, Baoyi and Poh, Patrina S P and Chan, Wing Lee},
  title = {Topology–Process Interactions During Fabrication Shape Triply Periodic Minimal Surface Microarchitecture and Osteogenic Outcomes in Melt‐Extruded Polycaprolactone Scaffolds},
  journal = {Journal of Biomedical Materials Research Part A},
  year = {2026},
  volume = {114},
  number = {11},
  doi = {10.1002/jbm.a.70161}
}
Kostenlos starten →