EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Electro‐Actuation of a Smart Hydrogel Compatible With 3D Printing

Georgios Mikalef iD, Zoe Schofield, Samuel Robert Moxon, Thomas Edward Robinson, Hin On Chu, Peter Freddie Nugent, Daniele Baiocco, Patricia Perez Esteban, Liam Michael Grover

Journal of Biomedical Materials Research Part A · 2025-10 · 113 (10)

DOI: 10.1002/jbm.a.38004 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Biomedical Materials Research Part A, online erschienen am 14.10.2025. Verfasst von Georgios Mikalef und 8 weiteren Autor:innen. Beteiligte Einrichtung: Healthcare Technologies Institute, University of Birmingham, Birmingham, UK. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Hydrogels, Biocompatible Materials, Smart Materials. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Commission.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hydrogels that can change shape on the application of an electric field are receiving increasing attention due to their potential to fulfill a range of functions in biomedicine, including the controlled release of therapeutic agents or the creation of replacements for contractile tissues. In this manuscript, a novel electroactive polymer was reported based on the copolymerisation of 2‐acrylamido‐2‐methylpronane sulfonic acid and poly(ethylene glycol) diacrylate (AMPS‐ co ‐PEGDA), via free radical polymerization using UV light. It was shown that to enable curing and the production of a material that could repeatably actuate without cracking, 900 mJ/cm 2 (at 365 nm −1 ) of UV exposure was optimal. Further increasing the curing time resulted in the production of a brittle material that cracked following actuation, preventing multiple actuations from occurring. The polymer that was cured for 900 mJ/cm 2 was shown to be non‐cytotoxic to dermal fibroblast cells, showing potential in biomedical applications. Furthermore, it was shown that the optimized polymer could be structured using a process of suspended 3D printing, allowing for the manufacture of complex, electro‐actuatable geometries. Processing in an agarose supporting bed resulted in a reduction in the Young's modulus of the printed polymer and an associated greater degree of bending. These results demonstrate that the optimized (AMPS‐ co ‐PEGDA) polymer is a promising electroactive material with tuneable properties and complex geometries, suitable for advanced biomedical applications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalHydrogelsBiocompatible MaterialsSmart MaterialsFibroblastsHumansPolyethylene GlycolsMaterials TestingPolymerization

Stichwörter der Autor:innen

3D printingelectro‐actuationhydrogelstimuli‐responsive

Substanzen

HydrogelsPolyethylene Glycolspoly(ethylene glycol)diacrylateBiocompatible MaterialsSmart Materials

Autor:innen und Institutionen

  • Healthcare Technologies Institute, University of Birmingham, Birmingham, UK.
  • School of Chemical Engineering, University of Birmingham, Birmingham, UK.

ORCID-Profile: Georgios Mikalef

Förderung

  • European Commission

Zitieren

APA

Mikalef, G., Schofield, Z., Moxon, S. R., Robinson, T. E., Chu, H. O., Nugent, P. F., Baiocco, D., Esteban, P. P., & Grover, L. M. (2025). Electro‐Actuation of a Smart Hydrogel Compatible With 3D Printing. Journal of Biomedical Materials Research Part A, 113(10). https://doi.org/10.1002/jbm.a.38004

Vancouver

Mikalef G, Schofield Z, Moxon SR, Robinson TE, Chu HO, Nugent PF, et al. Electro‐Actuation of a Smart Hydrogel Compatible With 3D Printing. Journal of Biomedical Materials Research Part A. 2025;113(10). doi:10.1002/jbm.a.38004

BibTeX
@article{Mikalef2025,
  author = {Mikalef, Georgios and Schofield, Zoe and Moxon, Samuel Robert and Robinson, Thomas Edward and Chu, Hin On and Nugent, Peter Freddie and Baiocco, Daniele and Esteban, Patricia Perez and Grover, Liam Michael},
  title = {Electro‐Actuation of a Smart Hydrogel Compatible With 3D Printing},
  journal = {Journal of Biomedical Materials Research Part A},
  year = {2025},
  volume = {113},
  number = {10},
  doi = {10.1002/jbm.a.38004}
}
Kostenlos starten →