EUVIMEDEUVIMED entdecken
Crossref

Modulating Hydrogel Stiffness Through Light‐Based 3D Printing to Mimic Cardiac Fibrosis and Cardiomyocyte Dysfunction Using hiPSC ‐Derived Cells

Sogu Sohn iD, Nima Momtahan, Lynn M Stevens, Jiwan Han, Yutong Liu, Meghan T Kiker, Elizabeth A Recker, Zachariah A Page, Janet Zoldan

Journal of Biomedical Materials Research Part A · 2025-10 · 113 (10)

DOI: 10.1002/jbm.a.37997 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Biomedical Materials Research Part A, online erschienen am 07.10.2025. Verfasst von Sogu Sohn und 8 weiteren Autor:innen. Beteiligte Einrichtung: Biomedical Engineering Department, The University of Texas at Austin, Austin, Texas, United States. Hauptthemen laut MEDLINE: Induced Pluripotent Stem Cells, Myocytes, Cardiac, Hydrogels, Printing, Three-Dimensional. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 46 Literaturangaben. Gefördert von: Harry S. Moss Heart Trust, NHLBI NIH HHS, National Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The human heart's limited regenerative capacity is a significant barrier to addressing cardiovascular disease (CVD). This is particularly true for cardiac fibrosis, a form of CVD wherein the wound healing process has gone awry. In cardiac fibrosis, excessive scar tissue formation due to dysregulated remodeling of the heart's extracellular matrix (ECM) results in increased stiffness that reduces cardiac output and can lead to heart failure. This dysregulated ECM deposition is driven by activated cardiac fibroblasts, where cell substrate stiffness is known to play a role in cardiac fibroblast activation. New preclinical models that accurately recapitulate the behavior of activated cardiac fibroblasts are needed to better understand and treat cardiac fibrosis. To this end, we describe a model wherein human induced pluripotent stem cell (hiPSC)‐derived cardiac fibroblasts (HCFs) are cultured on 3D printed hydrogels of tunable stiffness, fabricated using dosage‐controlled digital light processing (DLP). We demonstrate that our model can induce HCF activation in the absence of TGFβ, a key mediator of fibroblast activation, surpassing the activation levels seen with HCFs activated with TGFβ on protein‐coated tissue culture plates. Furthermore, combining stiffer hydrogels with TGFβ recapitulates fibroblast activation similar to what is observed in native cardiac tissue. Lastly, by indirectly coculturing HCFs seeded and activated on these stiff hydrogels with hiPSC‐derived cardiomyocytes, we demonstrate that the activated HCFs in our cardiac fibrosis model can impair cardiomyocyte function, mimicking the deleterious effects of cardiac fibrosis.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Induced Pluripotent Stem CellsMyocytes, CardiacHydrogelsPrinting, Three-DimensionalLightHumansFibrosisFibroblasts

Stichwörter der Autor:innen

3D printingbiomaterialscardiac fibrosisdisease modelinghiPSC

Substanzen

Hydrogels

Autor:innen und Institutionen

  • Biomedical Engineering Department, The University of Texas at Austin, Austin, Texas, United States.
  • Department of Chemistry, The University of Texas at Austin, Austin, Texas, United States.
  • McKetta Department of Chemical Engineering, The University of Texas at Austin, Austin, Texas, United States.

ORCID-Profile: Sogu Sohn

Förderung

  • Harry S. Moss Heart Trust
  • NHLBI NIH HHS
  • National Science Foundation
  • Robert A. Welch Foundation
  • National Heart, Lung, and Blood Institute
  • Welch Foundation

Zitieren

APA

Sohn, S., Momtahan, N., Stevens, L. M., Han, J., Liu, Y., Kiker, M. T., Recker, E. A., Page, Z. A., & Zoldan, J. (2025). Modulating Hydrogel Stiffness Through Light‐Based 3D Printing to Mimic Cardiac Fibrosis and Cardiomyocyte Dysfunction Using hiPSC ‐Derived Cells. Journal of Biomedical Materials Research Part A, 113(10). https://doi.org/10.1002/jbm.a.37997

Vancouver

Sohn S, Momtahan N, Stevens LM, Han J, Liu Y, Kiker MT, et al. Modulating Hydrogel Stiffness Through Light‐Based 3D Printing to Mimic Cardiac Fibrosis and Cardiomyocyte Dysfunction Using hiPSC ‐Derived Cells. Journal of Biomedical Materials Research Part A. 2025;113(10). doi:10.1002/jbm.a.37997

BibTeX
@article{Sohn2025,
  author = {Sohn, Sogu and Momtahan, Nima and Stevens, Lynn M and Han, Jiwan and Liu, Yutong and Kiker, Meghan T and Recker, Elizabeth A and Page, Zachariah A and Zoldan, Janet},
  title = {Modulating Hydrogel Stiffness Through Light‐Based 3D Printing to Mimic Cardiac Fibrosis and Cardiomyocyte Dysfunction Using hiPSC ‐Derived Cells},
  journal = {Journal of Biomedical Materials Research Part A},
  year = {2025},
  volume = {113},
  number = {10},
  doi = {10.1002/jbm.a.37997}
}
Kostenlos starten →