EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

3D printing of chitooligosaccharide‐polyethylene glycol diacrylate hydrogel inks for bone tissue regeneration

Mina Rajabi iD, Jaydee D Cabral iD, Sarah Saunderson iD, M Azam Ali iD

Journal of Biomedical Materials Research Part A · 2023

DOI: 10.1002/jbm.a.37548 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Biomedical Materials Research Part A, 2023. Verfasst von Mina Rajabi und 3 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Dentistry, Division of Health Sciences, Centre for Bioengineering & Nanomedicine, Sir John Walsh Research Institute, University of Otago, …. Hauptthemen laut MEDLINE: Printing, Three-Dimensional. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 69 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To date, lack of functional hydrogel inks has limited 3D printing applications in tissue engineering. This study developed a series of photocurable hydrogel inks based on chitooligosaccharide (COS)‐polyethylene glycol diacrylate (PEGDA) for extrusion‐based 3D printing of bone tissue scaffolds. The scaffolds were prepared by aza‐Michael addition of COS and PEGDA followed by photopolymerisation of unreacted PEGDA . The hydrogel inks showed sufficient shear thinning properties required for extrusion 3D printing. The printed scaffolds exhibited excellent shape fidelity and fine microstructure with a resolution of 250 μm. By increasing the COS content, the swelling ratio of the scaffolds decreased, while the compressive strength increased. 3D printed COS‐PEGDA scaffolds showed high viability of human bone mesenchymal stem cells in vitro. In addition, scaffolds containing 2 wt% COS showed significantly higher alkaline phosphatase activity, calcium deposition, and bioactivity in simulated body fluid compared to the control (PEGDA). Altogether, 3D printed COS‐PEGDA scaffolds represent promising candidates for bone tissue regeneration.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalHydrogelsPolyethylene GlycolsHumansCell LineTissue ScaffoldsOsteogenesisCell DifferentiationAcrylatesOligosaccharidesChitosan

Stichwörter der Autor:innen

3D printingChitooligosaccharidebone regenerationhydrogelmesenchymal stem cellspolyethylene glycol diacrylate

Substanzen

HydrogelsPolyethylene Glycolsacrylic acidAcrylatesoligochitosanOligosaccharidesChitosan

Autor:innen und Institutionen

  • Faculty of Dentistry, Division of Health Sciences, Centre for Bioengineering & Nanomedicine, Sir John Walsh Research Institute, University of Otago, Dunedin, New Zealand.
  • Department of Microbiology and Immunology, University of Otago, Dunedin, New Zealand.

ORCID-Profile: Mina Rajabi, Jaydee D Cabral, Sarah Saunderson, M Azam Ali

Zitieren

APA

Rajabi, M., Cabral, J. D., Saunderson, S., & Ali, M. A. (2023). 3D printing of chitooligosaccharide‐polyethylene glycol diacrylate hydrogel inks for bone tissue regeneration. Journal of Biomedical Materials Research Part A. https://doi.org/10.1002/jbm.a.37548

Vancouver

Rajabi M, Cabral JD, Saunderson S, Ali MA. 3D printing of chitooligosaccharide‐polyethylene glycol diacrylate hydrogel inks for bone tissue regeneration. Journal of Biomedical Materials Research Part A. 2023. doi:10.1002/jbm.a.37548

BibTeX
@article{Rajabi2023,
  author = {Rajabi, Mina and Cabral, Jaydee D and Saunderson, Sarah and Ali, M Azam},
  title = {3D printing of chitooligosaccharide‐polyethylene glycol diacrylate hydrogel inks for bone tissue regeneration},
  journal = {Journal of Biomedical Materials Research Part A},
  year = {2023},
  doi = {10.1002/jbm.a.37548}
}
Kostenlos starten →