Sulfur‐containing spacer engineering for pure‐blue quasi‐ 2D metal bromide perovskite LEDs via in‐situ fabrication
InfoMat · 13.11.2026
DOI: 10.1002/inf2.70202 ↗Kurz gefasst
Fachartikel in der Zeitschrift InfoMat, online erschienen am 13.11.2026. Verfasst von Wei Wang und 18 weiteren Autor:innen. Die Arbeit nennt 79 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Science, Technology and Innovation Commission of Shenzhen Municipality.
Abstract (Originalsprache)
In‐situ‐prepared quasi‐2D metal bromide perovskites commonly suffer from multiphase coexistence, leading to energy funneling and broad spectra that hinder short‐wavelength pure‐blue emission. Organic spacer cation selection is crucial for regulating interlayer interactions, phase stability, and crystallization in pure‐bromide quasi‐2D perovskites. Herein, sulfur‐ and oxygen‐substituted organic spacer cations with different chain lengths were systematically investigated to clarify how heteroatom substitution and chain length regulate blue emission in quasi‐2D perovskites. Characterizations and theoretical calculations reveal that the sulfur (S)‐substituted short‐chain spacer, 2‐(methylthio)ethylammonium (MTEA + ), exhibits the strongest interlayer binding energy triggered by significant S···S noncovalent interactions and a moderate adsorption energy on the perovskite framework. These synergistic features favor the formation of an n ≈ 3‐dominant Ruddlesden–Popper quasi‐2D perovskite with a narrowed n ‐phase distribution. Spin‐coated perovskite light‐emitting diodes (PeLEDs) incorporating MTEA achieve pure‐blue electroluminescence at 468 nm with a narrow full width at half maximum of 26 nm and a maximum external quantum efficiency (EQE) of 5.37%. The quasi‐2D perovskite is also compatible with the inkjet‐printing technique, delivering the first‐ever pure‐blue printed electroluminescence below 480 nm (478 nm) and a record‐breaking EQE of 2.42%. This work proposes an effective ligand design strategy for the in‐situ preparation of phase‐selective blue layered perovskites with a narrowed n ‐phase distribution. image
Förderung
- National Natural Science Foundation of China
- Science, Technology and Innovation Commission of Shenzhen Municipality
Zitieren
APA
Wang, W., Yang, B., He, M., Zhang, E., Gao, J., Huang, Z., Chen, W., Hua, Y., Cai, B., Lu, S., Chen, S., Wang, M., Shen, W., Song, L., Liu, L., Chen, N., Cheng, G., Chen, S., & Zhao, Q. (2026). Sulfur‐containing spacer engineering for pure‐blue quasi‐ 2D metal bromide perovskite LEDs via in‐situ fabrication. InfoMat. https://doi.org/10.1002/inf2.70202
Vancouver
Wang W, Yang B, He M, Zhang E, Gao J, Huang Z, et al. Sulfur‐containing spacer engineering for pure‐blue quasi‐ 2D metal bromide perovskite LEDs via in‐situ fabrication. InfoMat. 2026. doi:10.1002/inf2.70202
BibTeX
@article{Wang2026,
author = {Wang, Wei and Yang, Bing and He, Mengyu and Zhang, Erdong and Gao, Jiajia and Huang, Zhouwenjing and Chen, Weiyuan and Hua, Yikun and Cai, Bo and Lu, Shuang and Chen, Shiyan and Wang, Minghao and Shen, Wei and Song, Lin and Liu, Lihui and Chen, Nian‐Ke and Cheng, Gang and Chen, Shufen and Zhao, Qiang},
title = {Sulfur‐containing spacer engineering for pure‐blue quasi‐ 2D metal bromide perovskite LEDs via in‐situ fabrication},
journal = {InfoMat},
year = {2026},
doi = {10.1002/inf2.70202}
}
EUVIMED