Addressing the interface issues of all‐solid‐state lithium batteries by ultra‐thin composite solid‐state electrolyte combined with the integrated preparation technology
InfoMat · 2025-08 · 7 (8)
DOI: 10.1002/inf2.70012 ↗Kurz gefasst
Fachartikel in der Zeitschrift InfoMat, online erschienen am 13.03.2025. Verfasst von Xiaoxue Zhao und 6 weiteren Autor:innen. Die Arbeit wurde bisher 79-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China.
Abstract (Originalsprache)
The interfacial engineering in solid‐state lithium batteries (SSLBs) is attracting escalating attention due to the profoundly enhanced safety, energy density, and charging capabilities of future power storage technologies. Nonetheless, polymer/ceramic interphase compatibility, serious agglomeration of ceramic particles, and discontinuous ionic conduction at the electrode/electrolyte interface seriously limit Li + transport in SSLBs and block the application and large‐scale manufacturing. Hence, garnet Li 7 La 3 Zr 2 O 12 (LLZO) nanoparticles are introduced into the polyacrylonitrile (PAN) nanofiber to fabricate a polymer‐ceramic nanofiber‐enhanced ultrathin SSE membrane (3D LLZO‐PAN), harnessing nanofiber confinement to aggregate LLZO nanoparticles to build the continuous conduction pathway of Li + . In addition, a novel integrated electrospinning process is deliberately designed to construct tight physical contact between positive electrode/electrolyte interphases. Importantly, the synergistic effect of the PAN, polyethylene oxide (PEO), and lithium bis((trifluoromethyl)sulfonyl)azanide (LiTFSI) benefits a stable solid electrolyte interphase (SEI) layer, resulting in superior cycling performance, achieving a remarkable 1500 h cycling at 0.2 mA cm −2 in the Li|3D LLZO‐PAN|Li battery. Consequently, the integrated polymer‐ceramic nanofiber‐enhanced SSEs simultaneously achieve the balance in ultrathin thickness (16 μm), fast ion transport (2.9 × 10 −4 S cm −1 ), and superior excellent interface contact (15.6 Ω). The LiNi 0.8 Co 0.1 Mn 0.1 O 2 |3D LLZO‐PAN|Li batteries (2.7–4.3 V) can work over 200 cycles at 0.5 C. The pouch cells with practical LiNi 0.8 Co 0.1 Mn 0.1 O 2 ||Li configuration achieve an ultrahigh energy density of 345.8 Wh kg −1 and safety performance. This work provides new strategies for the manufacturing and utilization of high‐energy‐density SSLBs. image
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
Zitieren
APA
Zhao, X., Wang, C., Fan, X., Li, Y., Li, D., Zhang, Y., & Fan, L. (2025). Addressing the interface issues of all‐solid‐state lithium batteries by ultra‐thin composite solid‐state electrolyte combined with the integrated preparation technology. InfoMat, 7(8). https://doi.org/10.1002/inf2.70012
Vancouver
Zhao X, Wang C, Fan X, Li Y, Li D, Zhang Y, et al. Addressing the interface issues of all‐solid‐state lithium batteries by ultra‐thin composite solid‐state electrolyte combined with the integrated preparation technology. InfoMat. 2025;7(8). doi:10.1002/inf2.70012
BibTeX
@article{Zhao2025,
author = {Zhao, Xiaoxue and Wang, Chao and Fan, Xiaomeng and Li, Yang and Li, Dabing and Zhang, Yanling and Fan, Li‐Zhen},
title = {Addressing the interface issues of all‐solid‐state lithium batteries by ultra‐thin composite solid‐state electrolyte combined with the integrated preparation technology},
journal = {InfoMat},
year = {2025},
volume = {7},
number = {8},
doi = {10.1002/inf2.70012}
}
EUVIMED