Concentration control of aluminum dopant in 4H‐SiC epitaxy by monomers selection on atomic step surfaces
Information & Functional Materials · 2025
DOI: 10.1002/ifm2.35 ↗Kurz gefasst
Fachartikel in der Zeitschrift Information & Functional Materials, 2025. Verfasst von Junqi Yao und 6 weiteren Autor:innen. Die Arbeit nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The P‐type 4H‐SiC epitaxy has gained increased interest due to the pressure of power devices demand. The objective of this study was to understand the behaviors of aluminum (Al) dopant influenced by different chemical potentials (i.e., growth monomers) on the different atomic step surfaces and therefore, design an optimized growth method to achieve a heavily‐doped, high‐quality, and large‐size epitaxy. The theoretical simulations showed that a C‐rich growth condition (i.e., high C/Si ratio) was beneficial to the adsorption of Al atom on the 4H‐SiC step surfaces, but the potentially negative impact on the step heights required attention. Subsequently, 6‐inch epitaxial experiments with four C/Si ratios were designed and tested, and a compromise between the doping efficiency and material quality was found. A growth optimization was further conducted, and a 1.0 × 10 19 cm −3 Al‐doping concentration was achieved in the epitaxial growth but without sacrificing material quality. This study demonstrated a growth method of monomers selection to control the Al‐doping concentration from the theoretical to experimental aspects and could contribute to the field of power device fabrication.
Zitieren
APA
Yao, J., Chen, H., Qian, W., Huang, F., Chen, H., Kang, W., & Kang, J. (2025). Concentration control of aluminum dopant in 4H‐SiC epitaxy by monomers selection on atomic step surfaces. Information & Functional Materials. https://doi.org/10.1002/ifm2.35
Vancouver
Yao J, Chen H, Qian W, Huang F, Chen H, Kang W, et al. Concentration control of aluminum dopant in 4H‐SiC epitaxy by monomers selection on atomic step surfaces. Information & Functional Materials. 2025. doi:10.1002/ifm2.35
BibTeX
@article{Yao2025,
author = {Yao, Junqi and Chen, Hangyang and Qian, Weining and Huang, Feihong and Chen, Haonan and Kang, Wenyu and Kang, Junyong},
title = {Concentration control of aluminum dopant in 4H‐SiC epitaxy by monomers selection on atomic step surfaces},
journal = {Information & Functional Materials},
year = {2025},
doi = {10.1002/ifm2.35}
}
EUVIMED