EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Phase Transformation Induced Plastic Deformation Mechanism in α 2 ‐Ti 3 Al

Linfeng Qiu, Shiping Wang, Xiong Zhou, Zhongtao Lu, Xiege Huang, Xiaobin Feng, Bo Duan, Wenjuan Li, Pengcheng Zhai, Guodong Li, Yang Chen, Zhixiang Qi und 1 weitere

Interdisciplinary Materials · 2025-05 · 4 (3) · 524-534

DOI: 10.1002/idm2.12246 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Interdisciplinary Materials, online erschienen am 16.04.2025. Verfasst von Linfeng Qiu und 12 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

TiAl plays a crucial role in the field of aero‐engine as a new lightweight high‐temperature alloy. The γ / α 2 lamellar TiAl single crystals exhibit the highest recorded plasticity, much higher than the soft phase γ ‐TiAl. This suggests that the hard phase α 2 ‐Ti 3 Al may have a unique plastic deformation mechanism, which is important for essentially understanding the origin of unusual plasticity and further improving the mechanical properties of TiAl. Here, we found the dynamic sequential phase transformation between HCP and FCC under shear loading in α 2 ‐Ti 3 Al, which is a novel plastic deformation mechanism comparable to twinning. We attribute this to the bond‐breaking formation process called “catching bond”, which is the origin of atomic mechanism of phase transformation occurrence. This “catching bond” process is an effective way of energy dissipation that can release the internal stress while maintaining the integrity of structure. The higher cleavage energy than the generalized stacking fault energy (GSFE) guarantees the continuity of phase transformation during shearing. Moreover, the γ / α 2 coherent interface can reduce the GSFE, thus decreasing the critical resolved shear stress (CRSS) of the phase transformation by 35%, which suggests that the phase transformation induced plastic mechanism easily occurs in the lamellar structure. This study reveals the plastic deformation mechanism of α 2 ‐Ti 3 Al and explores the role of γ / α 2 coherent interface on the plasticity, which is expected to provide guidance for further improving the mechanical properties of TiAl alloys.

Zitieren

APA

Qiu, L., Wang, S., Zhou, X., Lu, Z., Huang, X., Feng, X., Duan, B., Li, W., Zhai, P., Li, G., Chen, Y., Qi, Z., & Chen, G. (2025). Phase Transformation Induced Plastic Deformation Mechanism in α 2 ‐Ti 3 Al. Interdisciplinary Materials, 4(3), 524-534. https://doi.org/10.1002/idm2.12246

Vancouver

Qiu L, Wang S, Zhou X, Lu Z, Huang X, Feng X, et al. Phase Transformation Induced Plastic Deformation Mechanism in α 2 ‐Ti 3 Al. Interdisciplinary Materials. 2025;4(3):524-534. doi:10.1002/idm2.12246

BibTeX
@article{Qiu2025,
  author = {Qiu, Linfeng and Wang, Shiping and Zhou, Xiong and Lu, Zhongtao and Huang, Xiege and Feng, Xiaobin and Duan, Bo and Li, Wenjuan and Zhai, Pengcheng and Li, Guodong and Chen, Yang and Qi, Zhixiang and Chen, Guang},
  title = {Phase Transformation Induced Plastic Deformation Mechanism in α 2 ‐Ti 3 Al},
  journal = {Interdisciplinary Materials},
  year = {2025},
  volume = {4},
  number = {3},
  pages = {524--534},
  doi = {10.1002/idm2.12246}
}
Kostenlos starten →