Geometric Optimization of Internal Fins for Improved Melting Performance of Nano‐Enhanced PCM in Thermal Energy Storage Systems
Heat Transfer · 2026-09 · 55 (6) · 3469-3481
DOI: 10.1002/htj.70266 ↗Kurz gefasst
Fachartikel in der Zeitschrift Heat Transfer, online erschienen am 04.05.2026. Verfasst von Ilias Benyahia und 5 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben. Gefördert von: Prince Sattam bin Abdulaziz University.
Abstract (Originalsprache)
Recent interest in the use of nano‐enhanced phase change materials (Ne‐PCMs) for thermal energy storage (TES) has increased due to their improved thermophysical properties. A promising method to enhance their thermal conductivity is to incorporate an innovative fin geometry that accelerates melting (MP). Here, we study the thermal performance of six varieties of fins in a latent heat storage unit filled with copper nanoparticle‐enhanced paraffin wax. Three configurations use T‐shaped fins, while the other three incorporate fins tilted at 45°. The melting front and heat transfer (HT) were simulated using a numerical code that solved the enthalpy‐porosity approach. We focus on the evolution of mean temperature, liquid fraction, Bejan (Be) number, and stored thermal energy. Among all configurations, Case 3, which used optimal T‐fins, exhibited the fastest thermal response, with a total melting time reduced by 31.91% compared to the reference design (Case 1). Furthermore, the inclined fins in Cases 4, 5, and 6 were found to delay the MP, increasing the required time by 91.7%, 80%, and 56.25%, respectively, relative to their non‐tilted counterparts. These results highlight the superior performance of Case 3, which is recommended as the optimal fin design for enhancing the efficiency of Ne‐PCM TES systems.
Förderung
- Prince Sattam bin Abdulaziz University
Zitieren
APA
Benyahia, I., Abderrahmane, A., Mourad, A., Aldawsari, M. A., Sharief, Y. M., & Younis, O. (2026). Geometric Optimization of Internal Fins for Improved Melting Performance of Nano‐Enhanced PCM in Thermal Energy Storage Systems. Heat Transfer, 55(6), 3469-3481. https://doi.org/10.1002/htj.70266
Vancouver
Benyahia I, Abderrahmane A, Mourad A, Aldawsari MA, Sharief YM, Younis O. Geometric Optimization of Internal Fins for Improved Melting Performance of Nano‐Enhanced PCM in Thermal Energy Storage Systems. Heat Transfer. 2026;55(6):3469-3481. doi:10.1002/htj.70266
BibTeX
@article{Benyahia2026,
author = {Benyahia, Ilias and Abderrahmane, Aissa and Mourad, Abed and Aldawsari, Murdhy A. and Sharief, Yahia M. and Younis, Obai},
title = {Geometric Optimization of Internal Fins for Improved Melting Performance of Nano‐Enhanced PCM in Thermal Energy Storage Systems},
journal = {Heat Transfer},
year = {2026},
volume = {55},
number = {6},
pages = {3469--3481},
doi = {10.1002/htj.70266}
}
EUVIMED