Heat Transfer Enhancement of Heat Sink With Gradual Cross‐Section of Metal Foam Fins
Heat Transfer · 2026-07 · 55 (5) · 3386-3403
DOI: 10.1002/htj.70261 ↗Kurz gefasst
Fachartikel in der Zeitschrift Heat Transfer, online erschienen am 29.04.2026. Verfasst von Hamdi E. Ahmed und 3 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben.
Abstract (Originalsprache)
For thermal management of high‐powered electronic components, a comprehensive investigation using metal foam fins (MFF) in heat sinks is analyzed in this work to optimize the thermal‐hydraulic performance of conventional plate‐fin heat sinks. Aluminum metal foam having porosity of 0.93 and 10 PPI is examined. A parametric optimization has been carried out on fixed and variable cross‐sectional area of the MFF with x ‐, y‐, and xy ‐directions keeping the fin volume constant for the Reynolds number (Re) range of 2000–8000. The finite volume method is used for solving the governing equations in 3D, and the RNG based k‐ε turbulent model is adopted. The SIMPLE algorithm is applied to couple differential equations for both solid‐liquid (water) phases under local thermal equilibrium condition. The numerical simulation is first validated with former experimental data of literature, and a good agreement is noticed. The results show that a higher Nusselt number ( Nu ), more frictional losses, and greater Performance Evaluation Criterion (PEC) are obtained using MFFs. These MFFs exhibit unexpected enhancement when a variable cross‐sectional MFF area is used, and the case y ‐4 and xy ‐1 demonstrate optimal results (i.e., the Nu ratio, friction factor ratio, and PEC are 6.12, 3.8, 3.92, and 6.25, 3.67, 4.06, at Re = 2000, respectively). In addition, the highest Nusselt number obtained is 438 at Re = 8000 and the greatest PEC is 4.06 at Re = 2000.
Zitieren
APA
Ahmed, H. E., Adham, A. M., Filali, A., & Boucif, Z. (2026). Heat Transfer Enhancement of Heat Sink With Gradual Cross‐Section of Metal Foam Fins. Heat Transfer, 55(5), 3386-3403. https://doi.org/10.1002/htj.70261
Vancouver
Ahmed HE, Adham AM, Filali A, Boucif Z. Heat Transfer Enhancement of Heat Sink With Gradual Cross‐Section of Metal Foam Fins. Heat Transfer. 2026;55(5):3386-3403. doi:10.1002/htj.70261
BibTeX
@article{Ahmed2026,
author = {Ahmed, Hamdi E. and Adham, Ahmed Mohammed and Filali, Abdelkader and Boucif, Zina},
title = {Heat Transfer Enhancement of Heat Sink With Gradual Cross‐Section of Metal Foam Fins},
journal = {Heat Transfer},
year = {2026},
volume = {55},
number = {5},
pages = {3386--3403},
doi = {10.1002/htj.70261}
}
EUVIMED