EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Clays for Low‐Carbon Cements: Overview, Progress, and Challenges

Imane Koufany, Isabel Santacruz, Angeles G De la Torre, María D Rodríguez-Ruiz, Miguel A G Aranda iD

Global Challenges · 2026-01 · 10 (1)

DOI: 10.1002/gch2.202500496 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Global Challenges, online erschienen am 27.01.2026. Verfasst von Imane Koufany und 4 weiteren Autor:innen. Beteiligte Einrichtung: Departamento de Química Inorgánica Cristalografía y Mineralogía University of Malaga Malaga Spain. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 212 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agencia Estatal de Investigación, HORIZON EUROPE European Research Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The replacement of Portland clinker with supplementary cementitious materials is a key approach to reducing the embodied carbon content of concretes. In this context, a widely studied family is the “limestone calcined clay cements, LC 3 .” Within this eco‐friendly family of materials, one composition is gaining popularity, LC 3 ‐50, a blend of ~50% of Portland clinker, 30% of activated clay, 15% of limestone and 5% of gypsum. This interest is due to a ~40% reduction of CO 2 emissions compared to Portland clinker, together with high compressive strengths after 7 days and very good durability against chloride and sulfate attacks. However, limitations still exist, such as low strengths at 1 day, workability loss during the first 2 h and reduced carbonation resistance. These drawbacks are being overcome with tailored admixtures and curing approaches. Here, after introducing low‐carbon cements, pozzolans, and pozzolanic reactions, as well as phyllosilicate minerals, attention is given to recent progress in thermal and mechanical, aka mechanochemical, activations. Then, general correlations are established to assist in predicting compressive strength. This work concludes by highlighting the challenges that must be overcome for the widespread adoption of these classic rocks processed to yield advanced materials with the highest possible pozzolanic reactivity.

Schlagwörter

Stichwörter der Autor:innen

R3 testSCMsartificial pozzolanscompressive strengthslow CO2 footprintmechanical activationthermal activation

Autor:innen und Institutionen

  • Departamento de Química Inorgánica Cristalografía y Mineralogía University of Malaga Malaga Spain.
  • Instituto Universitario de Materiales y Nanotecnología IMANA University of Malaga Malaga Spain.

ORCID-Profile: Miguel A G Aranda

Förderung

  • Agencia Estatal de Investigación
  • HORIZON EUROPE European Research Council

Zitieren

APA

Koufany, I., Santacruz, I., De la Torre, A. G., Rodríguez-Ruiz, M. D., & Aranda, M. A. G. (2026). Clays for Low‐Carbon Cements: Overview, Progress, and Challenges. Global Challenges, 10(1). https://doi.org/10.1002/gch2.202500496

Vancouver

Koufany I, Santacruz I, De la Torre AG, Rodríguez-Ruiz MD, Aranda MAG. Clays for Low‐Carbon Cements: Overview, Progress, and Challenges. Global Challenges. 2026;10(1). doi:10.1002/gch2.202500496

BibTeX
@article{Koufany2026,
  author = {Koufany, Imane and Santacruz, Isabel and De la Torre, Angeles G and Rodríguez-Ruiz, María D and Aranda, Miguel A G},
  title = {Clays for Low‐Carbon Cements: Overview, Progress, and Challenges},
  journal = {Global Challenges},
  year = {2026},
  volume = {10},
  number = {1},
  doi = {10.1002/gch2.202500496}
}
Kostenlos starten →