EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Bio‐Graphene Sensors for Monitoring Moisture Levels in Wood and Ambient Environment

Mohammad Yusuf Mulla, Patrik Isacsson, Illia Dobryden, Valerio Beni, Emma Östmark, Karl Håkansson, Jesper Edberg iD

Global Challenges · 2023-04 · 7 (4)

DOI: 10.1002/gch2.202200235 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Global Challenges, online erschienen am 21.02.2023. Verfasst von Mohammad Yusuf Mulla und 6 weiteren Autor:innen. Beteiligte Einrichtung: Printed-, Bio- and Organic Electronics RISE Research Institutes of Sweden Bredgatan 35 Norrköping SE-602 21 Sweden. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Vinnova, Stora Enso.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Wood is an inherently hygroscopic material which tends to absorb moisture from its surrounding. Moisture in wood is a determining factor for the quality of wood being employed in construction, since it causes weakening, deformation, rotting, and ultimately leading to failure of the structures resulting in costs to the economy, the environment, and to the safety of residents. Therefore, monitoring moisture in wood during the construction phase and after construction is vital for the future of smart and sustainable buildings. Employing bio‐based materials for the construction of electronics is one way to mitigate the environmental impact of such electronics. Herein, a bio‐graphene sensor for monitoring the moisture inside and around wooden surfaces is fabricated using laser‐induced graphitization of a lignin‐based ink precursor. The bio‐graphene sensors are used to measure humidity in the range of 10% up to 90% at 25 °C. Using laser induced graphitization, conductor resistivity of 18.6 Ω sq −1 is obtained for spruce wood and 57.1 Ω sq −1 for pine wood. The sensitivity of sensors fabricated on spruce and pine wood is 2.6 and 0.74 MΩ per % RH. Surface morphology and degree of graphitization are investigated using scanning electron microscopy, Raman spectroscopy, and thermogravimetric analysis methods.

Schlagwörter

Stichwörter der Autor:innen

cellulosehumidity sensorslaser‐induced grapheneligninmoisture sensorswood

Autor:innen und Institutionen

  • Printed-, Bio- and Organic Electronics RISE Research Institutes of Sweden Bredgatan 35 Norrköping SE-602 21 Sweden.
  • Digital Cellulose Center Bredgatan 35 Norrköping SE-602 21 Sweden.
  • Department of Science and Technology (ITN) Laboratory of Organic Electronics Linköping University Norrköping SE-601 74 Sweden.
  • Ahlstrom Group Innovation Apprieu 38140 France.
  • Bioeconomy and Health RISE Research Institutes of Sweden Drottning Kristinas väg 61 Stockholm SE-114 28 Sweden.
  • Stora Enso AB Innovation Centre for Biomaterials Box 70395 Stockholm SE-107 24 Sweden.

ORCID-Profile: Jesper Edberg

Förderung

  • Vinnova
  • Stora Enso

Zitieren

APA

Mulla, M. Y., Isacsson, P., Dobryden, I., Beni, V., Östmark, E., Håkansson, K., & Edberg, J. (2023). Bio‐Graphene Sensors for Monitoring Moisture Levels in Wood and Ambient Environment. Global Challenges, 7(4). https://doi.org/10.1002/gch2.202200235

Vancouver

Mulla MY, Isacsson P, Dobryden I, Beni V, Östmark E, Håkansson K, et al. Bio‐Graphene Sensors for Monitoring Moisture Levels in Wood and Ambient Environment. Global Challenges. 2023;7(4). doi:10.1002/gch2.202200235

BibTeX
@article{Mulla2023,
  author = {Mulla, Mohammad Yusuf and Isacsson, Patrik and Dobryden, Illia and Beni, Valerio and Östmark, Emma and Håkansson, Karl and Edberg, Jesper},
  title = {Bio‐Graphene Sensors for Monitoring Moisture Levels in Wood and Ambient Environment},
  journal = {Global Challenges},
  year = {2023},
  volume = {7},
  number = {4},
  doi = {10.1002/gch2.202200235}
}
Kostenlos starten →