EUVIMEDEUVIMED entdecken
Crossref

Simulation of PEM Fuel Cell Shutdown Purging Using VOF‐Based Workflow

Sergi Sanchez‐Gamero, Wilfried Edelbauer, Clemens Fink, Gabor Janiga, Manolis Gavaises

Fuel Cells · 2026-04 · 26 (2)

DOI: 10.1002/fuce.70059 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fuel Cells, online erschienen am 06.03.2026. Verfasst von Sergi Sanchez‐Gamero und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 50 Literaturangaben. Gefördert von: HORIZON EUROPE Marie Sklodowska-Curie Actions.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Gas purging is a critical operation in low‐temperature PEM fuel cells (PEMFC) for removing the accumulated liquid water, preventing freezing after shutdown, and maintaining the cell's durability. In this work, a high‐fidelity workflow based on the volume‐of‐fluid (VOF) method is presented for simulating shutdown purging in PEMFC's with parallel channels. The initialization of liquid water is derived from PEMFC multiphysics simulations, complemented with experimental assumptions of corner attachment and droplet sizes forming on the surface of the gas diffusion layer (GDL). The workflow is tested on the purging of a cathode flow field after shutdown. Parametric studies were performed varying temperature, initial water accumulation scenarios, droplet size, and purging pressure drop. In all cases, a quasi‐steady state was reached in which residual water persisted in the flow field, even when the purging time was extended. Liquid water preferentially accumulated in the central channels and at outlet edges, where sharp edge pinning caused slug retention and even complete channel blockage. These results underline two key design limitations of parallel flow fields: maldistribution and outlet pinning. Purging at higher temperatures, closer to the operating temperatures, can reduce the purging time, although it does not improve the amount of remaining water. A sweeping effect has been identified as a positive purging mechanism, in which nearby droplets coalesce into a bigger slug that travels downstream, flushing smaller droplets. Increasing the pressure drop initially improves water removal by up to 10%, but excessive values lead to flow maldistribution and backflow in the central channels, limiting water removal performance. The proposed workflow successfully captures the underlying flow and water‐removal dynamics and offers a foundation for optimizing purge strategies and refining flow field designs.

Förderung

  • HORIZON EUROPE Marie Sklodowska-Curie Actions

Zitieren

APA

Sanchez‐Gamero, S., Edelbauer, W., Fink, C., Janiga, G., & Gavaises, M. (2026). Simulation of PEM Fuel Cell Shutdown Purging Using VOF‐Based Workflow. Fuel Cells, 26(2). https://doi.org/10.1002/fuce.70059

Vancouver

Sanchez‐Gamero S, Edelbauer W, Fink C, Janiga G, Gavaises M. Simulation of PEM Fuel Cell Shutdown Purging Using VOF‐Based Workflow. Fuel Cells. 2026;26(2). doi:10.1002/fuce.70059

BibTeX
@article{SanchezGamero2026,
  author = {Sanchez‐Gamero, Sergi and Edelbauer, Wilfried and Fink, Clemens and Janiga, Gabor and Gavaises, Manolis},
  title = {Simulation of PEM Fuel Cell Shutdown Purging Using VOF‐Based Workflow},
  journal = {Fuel Cells},
  year = {2026},
  volume = {26},
  number = {2},
  doi = {10.1002/fuce.70059}
}
Infokarte | EUVIMED

Artikeldaten derzeit nicht verfügbar.

Recherche