EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental and Numerical Investigation on Ignition and Horizontal Flame Spread for Recycled Plastic Pellets

Courtney Devine, Natalia Flores‐Quiroz, Richard Walls, Carlo Kuhn

Fire and Materials · 2026-08 · 50 (5) · 499-510

DOI: 10.1002/fam.70069 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fire and Materials, online erschienen am 24.04.2026. Verfasst von Courtney Devine und 3 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Department of Higher Education and Training, Lloyd's Register Foundation, Royal Academy of Engineering.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fires in recycling facilities are known for producing noxious fumes, having high heat release rates (HRRs), being difficult to extinguish and causing significant devastation to business operations. This research aims to provide experimental data and numerical models from which performance‐based designs can be developed for recycling facilities. Through validating simulation models against experimental data, ignition parameters are verified and can be used as inputs for future larger‐scale modelling of flame spread and behaviour. In previous research, cone calorimeter tests were conducted in which the thermal properties (HRR curves, heat of combustion [HOC], time to ignition [TTI]) of recycled plastic pellets were determined. In this research ignition and flame spread are studied, which includes flame spread experiments in a horizontal trough. This data is used to calibrate the density, thermal conductivity, and specific heat capacity by comparing the TTI observed from cone calorimeter testing to that observed in simulated models. The HRR curves and HOC, in addition to the calibrated density, thermal conductivity and specific heat capacity, are used for fire dynamic simulator (FDS) models presented in this paper to simulate and observe the horizontal flame spread rate of shallow samples of plastic pellets made of recycled material. This paper then compares experimental and numerical horizontal flame spread rates and burning behaviour observed. The experimental and simulated horizontal flame spread rates are in the same order of magnitude, 0.2 and 0.35 cm/min respectively, highlighting that the ignition, initial flame spread and model parameters have been suitably captured.

Förderung

  • Department of Higher Education and Training
  • Lloyd's Register Foundation
  • Royal Academy of Engineering

Zitieren

APA

Devine, C., Flores‐Quiroz, N., Walls, R., & Kuhn, C. (2026). Experimental and Numerical Investigation on Ignition and Horizontal Flame Spread for Recycled Plastic Pellets. Fire and Materials, 50(5), 499-510. https://doi.org/10.1002/fam.70069

Vancouver

Devine C, Flores‐Quiroz N, Walls R, Kuhn C. Experimental and Numerical Investigation on Ignition and Horizontal Flame Spread for Recycled Plastic Pellets. Fire and Materials. 2026;50(5):499-510. doi:10.1002/fam.70069

BibTeX
@article{Devine2026,
  author = {Devine, Courtney and Flores‐Quiroz, Natalia and Walls, Richard and Kuhn, Carlo},
  title = {Experimental and Numerical Investigation on Ignition and Horizontal Flame Spread for Recycled Plastic Pellets},
  journal = {Fire and Materials},
  year = {2026},
  volume = {50},
  number = {5},
  pages = {499--510},
  doi = {10.1002/fam.70069}
}
Kostenlos starten →