EUVIMEDEUVIMED entdecken
Crossref

Architecturally robust MoWS 2 and Ti 3 C 2 T x MXene nanosheets hybrid for high‐performance energy storage and conversion applications

Abhinandan Patra, Chandra Sekhar Rout

Energy Storage · 2023-04 · 5 (3)

DOI: 10.1002/est2.411 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energy Storage, online erschienen am 20.09.2022. Verfasst von Abhinandan Patra und 1 weiteren Autor:innen. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 41 Literaturangaben. Gefördert von: Department of Science and Technology, Ministry of Science and Technology, India.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The quench for the unremitting energy demand can be gratified by finding various substitute renewable energy sources and consequently safekeeping of these energies by energy storage devices. A variety of transition metal dichalcogenide (TMDC) materials are being explored for the application of water splitting and supercapacitor among which MoWS 2 has gained its spot with potential tunable properties. Herein, the synthesis of MoWS 2 and its nanocomposite with Ti 3 C 2 T x MXene sheets is carried out by a simplistic hydrothermal method involving two steps. The structural and morphological characteristics were investigated through several characterization tools like powder X‐ray diffraction (pXRD), field emission scanning electron microscopy (FESEM), Raman spectroscopy and X‐ray photoelectron spectroscopy (XPS). The MXene sheets act as a template for the growth of MoWS 2 (MWS) nanosheets and could exhibit extraordinary supercapacitive and electrocatalytic activity. The highest specific capacitance achieved by the pseudocapacitive MoWS 2 @MXene (MWSM) was 259 F/g @0.2 A/g. Then the above‐mentioned negative electrode was again taken for asymmetric studies where CoSe 2 @CNT@rGO was preferred as a positive site electrode and the asymmetric device showed a specific energy of 14 Wh/kg at a specific power of 8 KW/kg with an excellent cycling stability and coulombic efficiency of 93% and 96% which was measured for 6000 cycles. The hydrogen evolution reaction (HER) studies displayed that only 186 mV of overpotential was required to attain 10 mA/cm 2 of current density. The electrocatalyst also achieved a small Tafel slope of 52 mV/dec along with exceptional stability upto 12 hours. High porosity, ample electrochemical active sites, rapid charge transfer kinetics and barrier‐free passage for ion transfer resulted in the enhanced electrochemical activity of MoWS 2 @MXene electrode/electrocatalyst.

Förderung

  • Department of Science and Technology, Ministry of Science and Technology, India

Zitieren

APA

Patra, A., & Rout, C. S. (2023). Architecturally robust MoWS 2 and Ti 3 C 2 T x MXene nanosheets hybrid for high‐performance energy storage and conversion applications. Energy Storage, 5(3). https://doi.org/10.1002/est2.411

Vancouver

Patra A, Rout CS. Architecturally robust MoWS 2 and Ti 3 C 2 T x MXene nanosheets hybrid for high‐performance energy storage and conversion applications. Energy Storage. 2023;5(3). doi:10.1002/est2.411

BibTeX
@article{Patra2023,
  author = {Patra, Abhinandan and Rout, Chandra Sekhar},
  title = {Architecturally robust MoWS 2 and Ti 3 C 2 T x MXene nanosheets hybrid for high‐performance energy storage and conversion applications},
  journal = {Energy Storage},
  year = {2023},
  volume = {5},
  number = {3},
  doi = {10.1002/est2.411}
}
Kostenlos starten →