Designing Orthogonal‐Arc Trajectories for Horizontal Wells to Reduce Drilling Cost in Development of Shale Oil/Gas Reservoirs
Energy Science & Engineering · 2026-07 · 14 (7) · 3102-3108
DOI: 10.1002/ese3.70568 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energy Science & Engineering, online erschienen am 28.05.2026. Verfasst von Jun Zhang und 2 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Louisiana Board of Regents.
Abstract (Originalsprache)
Designing 3‐dimensional (3D) horizontal well trajectories is critical for enhancing drilling efficiency in shale reservoirs. The objective of this work is to develop an easy‐to‐drill 3D trajectory to cut drilling cost in the development of shale oil/gas reservoirs. A new type of 3D trajectory is proposed to make well drillable with classical deflection tools rather than sophisticated modern defection tools. The new type of trajectory contains two curve sections in orthogonal orientation and is thus called Orthogonal‐Arc Trajectory (OAT). The two curve sections have the same curvature so that they can be drilled with the same deflection tool of constant curvature. A complete set of equations in closed form and a procedure of using the equations to design OAT are presented. An example design of OAT is demonstrated. The feature of single constant curvature of the OAT enables the use of simple and economical deflection tools to reduce drilling costs, which is particularly significant for small‐scale operators. It offers practical values for drilling optimization in regions where modern drilling tools, such as AutoTrak, Power Drive, and Geo‐Pilot, are not accessible or too expensive to use. Comparing to the radius of curvature trajectory and the constant turn rate trajectory, the OAT gives the lowest drag and torque that will reduce drilling complications and thus increase drilling safety. The OAT is specially applicable to drilling geothermal wells where the hot temperature of earth rock prevents using sophisticated modern defection tools that contain delicate electronic parts with temperature limit.
Förderung
- Louisiana Board of Regents
Zitieren
APA
Zhang, J., Guo, B., & Nawab, S. (2026). Designing Orthogonal‐Arc Trajectories for Horizontal Wells to Reduce Drilling Cost in Development of Shale Oil/Gas Reservoirs. Energy Science & Engineering, 14(7), 3102-3108. https://doi.org/10.1002/ese3.70568
Vancouver
Zhang J, Guo B, Nawab S. Designing Orthogonal‐Arc Trajectories for Horizontal Wells to Reduce Drilling Cost in Development of Shale Oil/Gas Reservoirs. Energy Science & Engineering. 2026;14(7):3102-3108. doi:10.1002/ese3.70568
BibTeX
@article{Zhang2026,
author = {Zhang, Jun and Guo, Boyun and Nawab, Sohail},
title = {Designing Orthogonal‐Arc Trajectories for Horizontal Wells to Reduce Drilling Cost in Development of Shale Oil/Gas Reservoirs},
journal = {Energy Science & Engineering},
year = {2026},
volume = {14},
number = {7},
pages = {3102--3108},
doi = {10.1002/ese3.70568}
}
EUVIMED