EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Sand Particle Size on Sand–Water Flow in a Francis‐99 Distributor

Ziyao Zhou, Pinyu Xiang, Kang Xu, Jitao Liu, Yuanyuan Gang, Haiqi Wang, Jiayang Pang, Xiaobing Liu

Energy Science & Engineering · 2025-07 · 13 (7) · 3753-3764

DOI: 10.1002/ese3.70134 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energy Science & Engineering, online erschienen am 13.05.2025. Verfasst von Ziyao Zhou und 7 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To examine the sand–water flow characteristics in the distributor of the Francis‐99 hydraulic turbine, numerical simulations were conducted using the Mixture multiphase flow model, focusing on the impact of varying sand particle sizes. The findings indicate that near‐wall velocities of sand and water in the fixed and guide vanes of the Francis‐99 hydraulic turbine range from 1.5 to 3.4 m/s and from 2.1 to 11.2 m/s, respectively, with the highest values observed at the tail section. The trajectories of smaller sand particles closely followed the water flow, whereas for particle sizes of around 0.3 mm, acceleration and deceleration processes showed a noticeable lag due to inertia, leading to significant velocity fluctuations compared to smaller particles. The sediment concentration on the front side of the stay and guide vanes initially increased and then decreased along the flow direction, whereas on the back side, a gradual reduction was observed, with the peak sediment concentration occurring at the head. As the sand particle size increased, the uniformity of the sediment concentration distribution on the guide vane surface decreased. When the average sediment concentration (volume fraction) in the flow field was 0.00095, the maximum concentration on the front side of the guide vane reached 0.0025, and the region of high concentration expanded, whereas the back side showed an opposite trend. The results further demonstrate that the arrangement of fixed and guide vanes influences the sediment concentration distribution in the sand–water flow within the hydraulic guide mechanism of the Francis‐99 hydraulic turbine, leading to inconsistencies in sediment distribution patterns on adjacent guide vane surfaces.

Zitieren

APA

Zhou, Z., Xiang, P., Xu, K., Liu, J., Gang, Y., Wang, H., Pang, J., & Liu, X. (2025). Effect of Sand Particle Size on Sand–Water Flow in a Francis‐99 Distributor. Energy Science & Engineering, 13(7), 3753-3764. https://doi.org/10.1002/ese3.70134

Vancouver

Zhou Z, Xiang P, Xu K, Liu J, Gang Y, Wang H, et al. Effect of Sand Particle Size on Sand–Water Flow in a Francis‐99 Distributor. Energy Science & Engineering. 2025;13(7):3753-3764. doi:10.1002/ese3.70134

BibTeX
@article{Zhou2025,
  author = {Zhou, Ziyao and Xiang, Pinyu and Xu, Kang and Liu, Jitao and Gang, Yuanyuan and Wang, Haiqi and Pang, Jiayang and Liu, Xiaobing},
  title = {Effect of Sand Particle Size on Sand–Water Flow in a Francis‐99 Distributor},
  journal = {Energy Science & Engineering},
  year = {2025},
  volume = {13},
  number = {7},
  pages = {3753--3764},
  doi = {10.1002/ese3.70134}
}
Kostenlos starten →