Minimizing Carbon Capture Costs in Power Plants: A Novel Dimensional Analysis Framework for Techno‐Economic Evaluation of Oxyfuel Combustion, Pre‐combustion, and Post‐combustion Capture Systems
Energy Science & Engineering · 2025-04 · 13 (4) · 1749-1770
DOI: 10.1002/ese3.2089 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energy Science & Engineering, online erschienen am 09.02.2025. Verfasst von Donald Obi und 2 weiteren Autor:innen. Die Arbeit wurde bisher 31-mal zitiert (Crossref) und nennt 69 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The imperative to mitigate anthropogenic CO 2 emissions from power generation plants, which account for approximately 40% of global emissions, necessitates developing and deploying carbon capture, utilization, and storage (CCUS) technologies. This study undertakes a comprehensive techno‐economic evaluation of three primary CO 2 capture technologies—pre‐combustion, post‐combustion, and oxy‐fuel combustion—integrated with natural gas power plants. Utilizing Aspen HYSYS design simulation and economic assessments, the technical and economic viability of each technology were investigated, considering key metrics such as levelized cost of energy (LCOE), carbon emission intensity (CEI), cost of carbon avoidance (COA), investment costs, production costs, net present value, and rate of return. A multi‐criteria evaluation framework incorporating dimensional analysis was employed to compare the technologies, and the results revealed post‐combustion capture as the most viable option with a cost factor (CF) value of 0.85, striking an optimal balance between efficiency, costs, and environmental impact. With minimized TIC and TPC, well below the conventional processes, this study produced a unique framework for reducing costs in CCS technology deployment. Conversely, oxy‐fuel combustion has huge drawbacks regarding low profitability as it was found to have the highest total investment cost (TIC) of $8,258,483.99 and annual production cost (APC) of $9,234,870. In contrast, a higher CEI of 0.05 tCO 2 /MWh and COA of $150.33/tCO 2 make pre‐combustion less environmentally friendly than the three technologies. The findings of this study provide critical insights to inform decision‐making in CCUS development, supporting a low‐carbon energy transition. Future research directions should focus on evaluating feasible configurations and optimizing post‐combustion capture technology for commercial‐scale deployment.
Zitieren
APA
Obi, D., Onyekuru, S., & Orga, A. (2025). Minimizing Carbon Capture Costs in Power Plants: A Novel Dimensional Analysis Framework for Techno‐Economic Evaluation of Oxyfuel Combustion, Pre‐combustion, and Post‐combustion Capture Systems. Energy Science & Engineering, 13(4), 1749-1770. https://doi.org/10.1002/ese3.2089
Vancouver
Obi D, Onyekuru S, Orga A. Minimizing Carbon Capture Costs in Power Plants: A Novel Dimensional Analysis Framework for Techno‐Economic Evaluation of Oxyfuel Combustion, Pre‐combustion, and Post‐combustion Capture Systems. Energy Science & Engineering. 2025;13(4):1749-1770. doi:10.1002/ese3.2089
BibTeX
@article{Obi2025,
author = {Obi, Donald and Onyekuru, Samuel and Orga, Anslem},
title = {Minimizing Carbon Capture Costs in Power Plants: A Novel Dimensional Analysis Framework for Techno‐Economic Evaluation of Oxyfuel Combustion, Pre‐combustion, and Post‐combustion Capture Systems},
journal = {Energy Science & Engineering},
year = {2025},
volume = {13},
number = {4},
pages = {1749--1770},
doi = {10.1002/ese3.2089}
}
EUVIMED