Research on the construction of novel nano‐modified clean fracturing fluid and the migration characteristics of proppants
Energy Science & Engineering · 2024-12 · 12 (12) · 5429-5442
DOI: 10.1002/ese3.1929 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energy Science & Engineering, online erschienen am 24.11.2024. Verfasst von Yanwei Liu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Clean fracturing fluid exhibits desirable characteristics, such as low residue, easy flowback, minimal reservoir damage, and favorable rheology, making it highly adaptable. However, challenges remain in terms of high cost, large consumption, and poor stability. Hence, this study focuses on incorporating SiO 2 nanoparticles into clean fracturing fluid to develop a novel nano‐modified system. Experimental tests were conducted to analyze the impact of mass fractions of hexadecyltrimethylammonium chloride (CTAC), sodium salicylate (Nasal), and SiO 2 nanoparticles on the viscosity of the solution. The results indicate a significant increase in viscosity with higher mass fractions of SiO 2 . A nano‐modified clean fracturing fluid composition of 1.5 wt% CTAC, 0.4 wt% Nasal, and 0.1 wt% SiO 2 was selected as it meets the technical specifications for fracturing fluid while exhibiting excellent elastic modulus (2.279 Pa) and viscous modulus (0.818 Pa), thereby displaying superior viscoelastic properties. Furthermore, the system maintains a viscosity above 20 mPa.s under temperature (70°C) and shear stress (170 s −1 ), indicating robust temperature and shear resistance to meet the demands of downhole fracturing and proppant transport. Based on rheological experimental data, a Carreau rheological model was established for the nano‐modified clean fracturing fluid. Considering particle interaction, wall blockage, and fluid filtration, a settlement model was modified with a correction coefficient, leading to the construction of a mathematical model for correcting proppant particle settling in fractures. The error between measured settlement velocity and calculated values remained within 10%. Finally, the migration law of proppant is studied, and the settlement law of proppant in fracturing fluid and fracture is clarified.
Zitieren
APA
Liu, Y., Jia, Z., Zuo, W., Han, H., Xie, K., & Li, L. (2024). Research on the construction of novel nano‐modified clean fracturing fluid and the migration characteristics of proppants. Energy Science & Engineering, 12(12), 5429-5442. https://doi.org/10.1002/ese3.1929
Vancouver
Liu Y, Jia Z, Zuo W, Han H, Xie K, Li L. Research on the construction of novel nano‐modified clean fracturing fluid and the migration characteristics of proppants. Energy Science & Engineering. 2024;12(12):5429-5442. doi:10.1002/ese3.1929
BibTeX
@article{Liu2024,
author = {Liu, Yanwei and Jia, Zichao and Zuo, Weiqin and Han, Hongkai and Xie, Kunrong and Li, Liwen},
title = {Research on the construction of novel nano‐modified clean fracturing fluid and the migration characteristics of proppants},
journal = {Energy Science & Engineering},
year = {2024},
volume = {12},
number = {12},
pages = {5429--5442},
doi = {10.1002/ese3.1929}
}
EUVIMED