Role of MgO in Al 2 O 3 ‐supported Fe catalysts for hydrogen and carbon nanotubes formation during catalytic methane decomposition
Energy Science & Engineering · 2024-10 · 12 (10) · 4166-4179
DOI: 10.1002/ese3.1867 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energy Science & Engineering, 2024-09. Verfasst von Mohammed O. Bayazed und 7 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: King Saud University.
Abstract (Originalsprache)
Catalytic methane decomposition is a promising technology for reducing the reliance on fossil fuels and mitigating the effects of climate change by producing clean hydrogen and value‐added carbon without the emission of greenhouse gases. The aim of the study was to investigate the use of Al 2 O 3 ‐modified MgO doped iron‐based catalysts for the catalytic decomposition of methane. The catalysts were synthesized using the impregnation method and characterized using various analysis techniques, including Brunauer, Emmett, and Teller, temperature programmed reduction, temperature programmed oxidation, X‐ray diffraction, thermal gravimetric analysis, Raman, scanning electron microscopy, and transmission electron microscopy. The activity of the synthesized catalysts was tested in a packed‐bed reactor with a gas flow rate of 20 mL/min at a temperature of 800°C. The investigation focuses on the influence of incorporating magnesium into alumina catalysts with MgO concentration ranging from (20%–70%), where higher magnesium levels improve catalytic activity by creating more active sites, positively impacting methane decomposition. Enhanced catalyst reducibility and increased particle dispersion lead to improved catalytic properties despite the reduced surface area. The FA70M and FA63M catalysts exhibited almost the same catalytic characteristics and the highest stability and methane conversion among the catalysts investigated, reaching 87% and 85% at 800°C for 120 min. Moreover, both catalysts showed hydrogen yields of 86% and 85%, respectively. The introduction of MgO further increased the total carbon yield from 103% with FA and 39% for FM to 114% and 120% for the respective catalysts (FA70M and FA63M). During the methane decomposition reaction, carbon nanotubes of varying diameters were produced. Higher iron loading resulted in a positive trend.
Förderung
- King Saud University
Zitieren
APA
Bayazed, M. O., Al‐Fatesh, A. S., Fakeeha, A. H., Ibrahim, A. A., Abasaeed, A. E., Alromaeh, A. I., Frusteri, F., & Dahrieh, J. K. A. (2024). Role of MgO in Al 2 O 3 ‐supported Fe catalysts for hydrogen and carbon nanotubes formation during catalytic methane decomposition. Energy Science & Engineering, 12(10), 4166-4179. https://doi.org/10.1002/ese3.1867
Vancouver
Bayazed MO, Al‐Fatesh AS, Fakeeha AH, Ibrahim AA, Abasaeed AE, Alromaeh AI, et al. Role of MgO in Al 2 O 3 ‐supported Fe catalysts for hydrogen and carbon nanotubes formation during catalytic methane decomposition. Energy Science & Engineering. 2024;12(10):4166-4179. doi:10.1002/ese3.1867
BibTeX
@article{Bayazed2024,
author = {Bayazed, Mohammed O. and Al‐Fatesh, Ahmed S. and Fakeeha, Anis H. and Ibrahim, Ahmed A. and Abasaeed, Ahmed E. and Alromaeh, Abdulaziz I. and Frusteri, Francesco and Dahrieh, Jehad K. Abu},
title = {Role of MgO in Al 2 O 3 ‐supported Fe catalysts for hydrogen and carbon nanotubes formation during catalytic methane decomposition},
journal = {Energy Science & Engineering},
year = {2024},
volume = {12},
number = {10},
pages = {4166--4179},
doi = {10.1002/ese3.1867}
}
EUVIMED