EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Interface passivation using diketopyrrolopyrrole‐oligothiophene copolymer to improve the performance of perovskite solar cells

Samuel Abicho, Bekele Hailegnaw, Felix Mayr, Munise Cobet, Cigdem Yumusak, Siraye Esubalew, Teketel Yohannes, Martin Kaltenbrunner, Niyazi Serdar Sariciftci, Markus Clark Scharber, Getachew Adam Workneh

Energy Science & Engineering · 2024-05 · 12 (5) · 2272-2283

DOI: 10.1002/ese3.1745 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energy Science & Engineering, online erschienen am 09.04.2024. Verfasst von Samuel Abicho und 10 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The unprecedented increase in power conversion efficiency (PCE) of low‐cost organo‐inorganic halide perovskite solar cells (OIHPSCs) toward its Shockley‐Queisser limit intriguingly has prompted researchers to investigate the disadvantages of these devices. The issue of operational stability is the main hurdle challenging the way forward for commercialization. To address this, various engineering processes like composition, additives, anti‐solvents, bulk and interface passivation, and deposition techniques have been widely applied to manage both extrinsic and intrinsic factors that induce degradation of the OIHPSCs. In this work, we employed interface passivation, which is an efficient approach to reduce nonradiative recombination. An ultrathin layer of electron donor diketopyrrolopyrrole‐oligothiophene copolymer (DPP860) was applied as an interface passivator between the photoactive layer and [6,6]‐phenyl C 61 butyric acid methyl ester (PCBM). The role of the interface passivation on optoelectronic properties of the OIHPSCs was assessed using current density versus voltage (J‐V) characteristics, photoluminescence spectroscopy and time‐resolved photoluminescence spectroscopy. The findings show devices treated with DPP860 exhibit enhanced current density ( J sc ) and fill factor, attributing for suppressed nonradiative recombination. Moreover, it shows relative improvement in the stability of the device. The results of this finding reveal that using oligothiophene copolymer can enhance the photovoltaic performance and the stability of inverted OIHPSCs in the ambient environment.

Zitieren

APA

Abicho, S., Hailegnaw, B., Mayr, F., Cobet, M., Yumusak, C., Esubalew, S., Yohannes, T., Kaltenbrunner, M., Sariciftci, N. S., Scharber, M. C., & Workneh, G. A. (2024). Interface passivation using diketopyrrolopyrrole‐oligothiophene copolymer to improve the performance of perovskite solar cells. Energy Science & Engineering, 12(5), 2272-2283. https://doi.org/10.1002/ese3.1745

Vancouver

Abicho S, Hailegnaw B, Mayr F, Cobet M, Yumusak C, Esubalew S, et al. Interface passivation using diketopyrrolopyrrole‐oligothiophene copolymer to improve the performance of perovskite solar cells. Energy Science & Engineering. 2024;12(5):2272-2283. doi:10.1002/ese3.1745

BibTeX
@article{Abicho2024,
  author = {Abicho, Samuel and Hailegnaw, Bekele and Mayr, Felix and Cobet, Munise and Yumusak, Cigdem and Esubalew, Siraye and Yohannes, Teketel and Kaltenbrunner, Martin and Sariciftci, Niyazi Serdar and Scharber, Markus Clark and Workneh, Getachew Adam},
  title = {Interface passivation using diketopyrrolopyrrole‐oligothiophene copolymer to improve the performance of perovskite solar cells},
  journal = {Energy Science & Engineering},
  year = {2024},
  volume = {12},
  number = {5},
  pages = {2272--2283},
  doi = {10.1002/ese3.1745}
}
Kostenlos starten →