EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Visible light‐active pure and lanthanum‐doped copper oxide nanostructures for photocatalytic degradation of methylene blue dye and hydrogen production

Muhammad Rafique, N. R. Khalid, Muneeb Irshad, Falak Shafiq, Muhammad Usman, Yasser Fouad, Muhammad Imran, Mohammad A. Assiri, Waqar Muhammad Ashraf

Energy Science & Engineering · 2023-07 · 11 (7) · 2601-2613

DOI: 10.1002/ese3.1476 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energy Science & Engineering, online erschienen am 10.05.2023. Verfasst von Muhammad Rafique und 8 weiteren Autor:innen. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Plan for Science, Technology and Innovation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Clean water and renewable energy sources are becoming increasingly important in the current era, as well as a future challenge, and one of the potential solutions is photocatalysis. In the current study, a simple one‐step hydrothermal technique is employed to fabricate the pure and La‐doped CuO (0%, 1%, 3%, 5%, and 7%) photocatalysts. The influence of varying La concentration on structure, morphology, and optical properties is determined by scanning electron microscope (SEM), X‐ray diffraction (XRD), ultraviolet (UV)–visible spectroscopy, and photoluminescence. SEM showed that synthesized nanostructures are irregularly spherical and transform into needle‐like nanostructures on increasing La concentration. XRD revealed the monoclinic phase with a crystallite size of 15–23 nm. The UV–visible spectrum exhibited a decrease in the band gap of La‐doped CuO needle‐like nanostructures from UV to visible light. The composition and purity of synthesized nanostructures are evaluated via the energy‐dispersive X‐ray spectrum which revealed that needle‐like nanostructures are pure without any impurity traces. The synthesized nanostructures were used as a photocatalyst against methylene blue dye to examine their photocatalytic activity. The synthesized CuO‐3La photocatalyst exhibited excellent photocatalytic performance of dye degradation and hydrogen production 95.3 μmol h −1 g −1 with more than 97% cyclic stability. Therefore, the synthesized La‐doped CuO nanostructures are potential candidates for photocatalytic water splitting and hydrogen evolution.

Förderung

  • National Plan for Science, Technology and Innovation

Zitieren

APA

Rafique, M., Khalid, N. R., Irshad, M., Shafiq, F., Usman, M., Fouad, Y., Imran, M., Assiri, M. A., & Ashraf, W. M. (2023). Visible light‐active pure and lanthanum‐doped copper oxide nanostructures for photocatalytic degradation of methylene blue dye and hydrogen production. Energy Science & Engineering, 11(7), 2601-2613. https://doi.org/10.1002/ese3.1476

Vancouver

Rafique M, Khalid NR, Irshad M, Shafiq F, Usman M, Fouad Y, et al. Visible light‐active pure and lanthanum‐doped copper oxide nanostructures for photocatalytic degradation of methylene blue dye and hydrogen production. Energy Science & Engineering. 2023;11(7):2601-2613. doi:10.1002/ese3.1476

BibTeX
@article{Rafique2023,
  author = {Rafique, Muhammad and Khalid, N. R. and Irshad, Muneeb and Shafiq, Falak and Usman, Muhammad and Fouad, Yasser and Imran, Muhammad and Assiri, Mohammad A. and Ashraf, Waqar Muhammad},
  title = {Visible light‐active pure and lanthanum‐doped copper oxide nanostructures for photocatalytic degradation of methylene blue dye and hydrogen production},
  journal = {Energy Science & Engineering},
  year = {2023},
  volume = {11},
  number = {7},
  pages = {2601--2613},
  doi = {10.1002/ese3.1476}
}
Kostenlos starten →