Applied Element Modelling of Out‐Of‐Plane Instability in Boundary Elements of Thin RC Walls
Earthquake Engineering & Structural Dynamics · 2026-09 · 55 (11) · 2800-2817
DOI: 10.1002/eqe.70226 ↗Kurz gefasst
Fachartikel in der Zeitschrift Earthquake Engineering & Structural Dynamics, online erschienen am 11.06.2026. Verfasst von Andrea Orgnoni und 2 weiteren Autor:innen. Die Arbeit nennt 68 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Recent earthquakes in Chile (2010) and New Zealand (2011) caused extensive damage to buildings featuring reinforced concrete (RC) structural walls, with observed failure modes including out‐of‐plane instability of slender walls. This buckling‐type response under combined in‐plane and out‐of‐plane loading has also been documented in experimental tests on rectangular RC walls. After reviewing the underlying mechanisms of global out‐of‐plane buckling and prior experimental and numerical studies, this paper investigates the capability of the Applied Element Method (AEM) to simulate out‐of‐plane instability failure in boundary elements of RC walls. Thanks to its discrete nature and computational efficiency, AEM has gained popularity in recent years for analysing collapse mechanisms in structures. Here, AEM is applied to reproduce the experimental response of boundary elements from thin RC walls with a single reinforcement layer—components particularly susceptible to out‐of‐plane failure even under purely cyclic in‐plane loading. The method successfully captures the initiation, progression, and partial recovery of out‐of‐plane deformations, as well as the development of the instability mechanism observed in tests. Comparisons with experimental results show good agreement and modest computational cost. Finally, for a reference specimen, AEM predictions are benchmarked against conventional Finite Element Method (FEM) results from prior studies: AEM reproduces more accurately the realistic (pinned‐like) out‐of‐plane displacement profile and the triggering levels of instability, owing to its ability to explicitly simulate discrete crack patterns without predefined crack locations, whereas FEM yields smoother profiles consistent with smeared‐crack assumptions and delayed onset of out‐of‐plane failure.
Zitieren
APA
Orgnoni, A., Pinho, R., & Almeida, J. P. D. (2026). Applied Element Modelling of Out‐Of‐Plane Instability in Boundary Elements of Thin RC Walls. Earthquake Engineering & Structural Dynamics, 55(11), 2800-2817. https://doi.org/10.1002/eqe.70226
Vancouver
Orgnoni A, Pinho R, Almeida JPD. Applied Element Modelling of Out‐Of‐Plane Instability in Boundary Elements of Thin RC Walls. Earthquake Engineering & Structural Dynamics. 2026;55(11):2800-2817. doi:10.1002/eqe.70226
BibTeX
@article{Orgnoni2026,
author = {Orgnoni, Andrea and Pinho, Rui and Almeida, João Pacheco de},
title = {Applied Element Modelling of Out‐Of‐Plane Instability in Boundary Elements of Thin RC Walls},
journal = {Earthquake Engineering & Structural Dynamics},
year = {2026},
volume = {55},
number = {11},
pages = {2800--2817},
doi = {10.1002/eqe.70226}
}
EUVIMED