Selective online model updating in hybrid simulation of a full‐scale steel moment frame
Earthquake Engineering & Structural Dynamics · 2024-08 · 53 (10) · 3071-3092
DOI: 10.1002/eqe.4149 ↗Kurz gefasst
Fachartikel in der Zeitschrift Earthquake Engineering & Structural Dynamics, online erschienen am 21.05.2024. Verfasst von Claudio Sepulveda und 8 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Institute of Standards and Technology, Ministry of Science and Technology, Taiwan.
Abstract (Originalsprache)
This study presents the implementation of an online model updating algorithm within a full‐scale hybrid simulation (HS) of a six story, four bay steel moment frame. The experimental substructure consists of a cruciform subassembly generating critical data on the nonlinear behavior of the first story column and two beams with reduced beam sections (RBSs) on each side. The updating algorithm focuses on the modeling parameters of plastic hinge elements representing the RBSs in the numerical model. A smooth plasticity model is utilized for beam plastic hinges with updating parameters identified from on‐line experimental data through a modified version of the unscented Kalman filter. The HS shows that the numerical beam hinges based on simple hysteretic model with updated parameters are able to capture the characteristic behavior observed in experiments. Due to fracture of beam flanges is observed in the experiments, a selective updating concept is proposed to allow for updating multiple numerical components accounting for asymmetric behavior and variability in the response. The selective updating method is validated through virtual HSs that are better able to identify and isolate the effects of fracture and other behavioral characteristics. The combination of results from physical and virtual tests highlights the benefits of model updating on the local and overall system‐level response.
Förderung
- National Institute of Standards and Technology
- Ministry of Science and Technology, Taiwan
Zitieren
APA
Sepulveda, C., Cheng, M., Becker, T., Mosqueda, G., Wang, K., Huang, P., Huang, C., Uang, C., & Chou, C. (2024). Selective online model updating in hybrid simulation of a full‐scale steel moment frame. Earthquake Engineering & Structural Dynamics, 53(10), 3071-3092. https://doi.org/10.1002/eqe.4149
Vancouver
Sepulveda C, Cheng M, Becker T, Mosqueda G, Wang K, Huang P, et al. Selective online model updating in hybrid simulation of a full‐scale steel moment frame. Earthquake Engineering & Structural Dynamics. 2024;53(10):3071-3092. doi:10.1002/eqe.4149
BibTeX
@article{Sepulveda2024,
author = {Sepulveda, Claudio and Cheng, Mao and Becker, Tracy and Mosqueda, Gilberto and Wang, Kung‐Juin and Huang, Po‐Chia and Huang, Cheng‐Wei and Uang, Chia‐Ming and Chou, Chung‐Che},
title = {Selective online model updating in hybrid simulation of a full‐scale steel moment frame},
journal = {Earthquake Engineering & Structural Dynamics},
year = {2024},
volume = {53},
number = {10},
pages = {3071--3092},
doi = {10.1002/eqe.4149}
}
EUVIMED