Interfacial Electronic Reconstruction in Cu 2 O Modified Niobium Phosphate Oxide for Efficient Oxygen Evolution and High‐Performance Energy Storage
EcoMat · 2026-11 · 8 (11)
DOI: 10.1002/eom2.70106 ↗Kurz gefasst
Fachartikel in der Zeitschrift EcoMat, online erschienen am 06.11.2026. Verfasst von Aviraj M. Teli und 6 weiteren Autor:innen. Die Arbeit nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry and Energy, National Research Foundation of Korea.
Abstract (Originalsprache)
Developing multifunctional electrodes for simultaneous energy storage and conversion is essential for sustainable energy technologies. Herein, we report Cu 2 O coating on niobium phosphate creates a heterogeneous interface that promotes charge separation, reduces interfacial resistance, and stabilizes redox‐active Cu sites. Niobium phosphate acts as a chemically robust, ion‐friendly scaffold, while the Cu 2 O couple provides a dynamically active surface accelerating electron transfer and intermediate adsorption. The intimate NbP@Cu 2 O heterointerface induces interfacial charge redistribution and strong electronic coupling, enabling rapid charge transfer, accelerated ion diffusion, and enhanced electrochemical kinetics for improved reaction performance. Consequently, the NbP@Cu 2 O electrode delivers a high specific capacity of 23.40 F/cm 2 at 5 mA/cm 2 , approximately 2.4 times higher than pristine NbP, together with excellent rate capability and coulombic efficiency. The assembled device achieves a specific capacitance of 410 mF/cm 2 , an energy density of 128 μWh/cm 2 at a power density of 760 μW/cm 2 and demonstrated robust endurance over an extended 100000‐cycle test (65% retention; 0.00035% loss per cycle). Furthermore, the heterostructure exhibits outstanding OER activity with a low overpotential of 275.2 mV at 100 mA/cm 2 , a Tafel slope of 48.2 mV/dec, and stable operation for 120 h. These findings demonstrate the potential of phosphate‐oxide heterointerface engineering for advanced bifunctional energy storage and conversion applications. image
Förderung
- Ministry of Trade, Industry and Energy
- National Research Foundation of Korea
Zitieren
APA
Teli, A. M., Beknalkar, S. A., Bhosale, M. K., Amate, R. U., Morankar, P. J., Yewale, M. A., & Shin, J. C. (2026). Interfacial Electronic Reconstruction in Cu 2 O Modified Niobium Phosphate Oxide for Efficient Oxygen Evolution and High‐Performance Energy Storage. EcoMat, 8(11). https://doi.org/10.1002/eom2.70106
Vancouver
Teli AM, Beknalkar SA, Bhosale MK, Amate RU, Morankar PJ, Yewale MA, et al. Interfacial Electronic Reconstruction in Cu 2 O Modified Niobium Phosphate Oxide for Efficient Oxygen Evolution and High‐Performance Energy Storage. EcoMat. 2026;8(11). doi:10.1002/eom2.70106
BibTeX
@article{Teli2026,
author = {Teli, Aviraj M. and Beknalkar, Sonali A. and Bhosale, Mrunal K. and Amate, Rutuja U. and Morankar, Pritam J. and Yewale, Manesh A. and Shin, Jae Cheol},
title = {Interfacial Electronic Reconstruction in Cu 2 O Modified Niobium Phosphate Oxide for Efficient Oxygen Evolution and High‐Performance Energy Storage},
journal = {EcoMat},
year = {2026},
volume = {8},
number = {11},
doi = {10.1002/eom2.70106}
}
EUVIMED