EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Heat‐Transfer Modeling of Rapid, Large‐Area UV ‐Assisted Sintering of TiO 2 Films for Perovskite Solar Modules

Jooyeon Shin, Jihun Jang, Yongseok Yoo, Hee Jeong Park, Hye Ryeong Lee, Sua Park, Byungsoo Kang, Seunghwan Bae, Min‐Cheol Kim, Heesuk Jung

EcoMat · 2026-12 · 8 (12)

DOI: 10.1002/eom2.70105 ↗

Kurz gefasst

Fachartikel in der Zeitschrift EcoMat, online erschienen am 16.11.2026. Verfasst von Jooyeon Shin und 9 weiteren Autor:innen. Die Arbeit nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Institute of Science and Technology, Korea Institute of Industrial Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Titanium dioxide (TiO 2 ) is extensively utilized as an electron transport layer (ETL) in photovoltaic devices because of its high electron mobility and electron selectivity. However, high‐performance TiO 2 ETLs typically require high‐temperature sintering to obtain high crystallinity and interparticle connectivity, limiting their compatibility with flexible substrates. Several low‐temperature sintering methods suffer from insufficient film uniformity, limited scalability, and restricted substrate compatibility. Ultraviolet (UV)‐assisted sintering has emerged as a promising alternative but the fundamental heat‐transfer mechanism and the quantitative correlations between UV‐irradiation parameters (lamp‐to‐sample distance, peak wavelength, and power) and the resulting temperature distributions remain insufficiently understood. Here, a coupled radiative‐conductive heat‐transfer model is developed and experimentally validated to clarify transient top‐down heating and the vertical temperature gradients during UV sintering. Systematic parameter mapping identifies optimal operating condition that maximize the film‐substrate temperature difference () while maintaining the flexible substrate temperature below its glass‐transition temperature. Under the optimized condition, the model predicts = 40.21 K with saturation within 20 s, and experiments confirm dense, highly crystalline TiO 2 ETLs on flexible substrates without thermal deformation. Consequently, perovskite solar modules incorporating UV‐sintered TiO 2 ETLs achieve power conversion efficiencies of 20.58% on glass and 16.19% on flexible substrates (aperture area: 31 cm 2 ). image

Förderung

  • Korea Institute of Science and Technology
  • Korea Institute of Industrial Technology

Zitieren

APA

Shin, J., Jang, J., Yoo, Y., Park, H. J., Lee, H. R., Park, S., Kang, B., Bae, S., Kim, M., & Jung, H. (2026). Heat‐Transfer Modeling of Rapid, Large‐Area UV ‐Assisted Sintering of TiO 2 Films for Perovskite Solar Modules. EcoMat, 8(12). https://doi.org/10.1002/eom2.70105

Vancouver

Shin J, Jang J, Yoo Y, Park HJ, Lee HR, Park S, et al. Heat‐Transfer Modeling of Rapid, Large‐Area UV ‐Assisted Sintering of TiO 2 Films for Perovskite Solar Modules. EcoMat. 2026;8(12). doi:10.1002/eom2.70105

BibTeX
@article{Shin2026,
  author = {Shin, Jooyeon and Jang, Jihun and Yoo, Yongseok and Park, Hee Jeong and Lee, Hye Ryeong and Park, Sua and Kang, Byungsoo and Bae, Seunghwan and Kim, Min‐Cheol and Jung, Heesuk},
  title = {Heat‐Transfer Modeling of Rapid, Large‐Area UV ‐Assisted Sintering of TiO 2 Films for Perovskite Solar Modules},
  journal = {EcoMat},
  year = {2026},
  volume = {8},
  number = {12},
  doi = {10.1002/eom2.70105}
}
Kostenlos starten →