Development of a Piezoelectric Stick‐Slip Actuator With Two L‐Shaped Flexure Hinges in Series Connection
Energy Technology · 2026-06 · 14 (6)
DOI: 10.1002/ente.70526 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energy Technology, online erschienen am 28.05.2026. Verfasst von Junxiang Jiang und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 41 Literaturangaben.
Abstract (Originalsprache)
In this work, a piezoelectric stick‐slip actuator with the merit of compact structure using a novel flexure hinge mechanism is proposed and experimentally evaluated. Two L‐shaped flexure hinges are connected in series to form a special flexure hinge mechanism. A PZT stack is inserted in this flexure hinge mechanism to serve as the actuation unit. The extension of PZT stack generates a hybrid deformation on the driving foot due to the special configuration. This hybrid deformation includes a vertical component and a horizontal component. They are used to press and drive the slider, respectively. The statics deformation analysis of the actuator is carried out by finite element simulation and a dynamic model is built to study the motion performance in theory. Finally, a prototype is manufactured and experimentally measured. The results showed that the maximum speed of the actuator was 4.39 mm/s when the voltage and exciting frequency were 100 V and 480 Hz. The actuator obtained the maximum output force of 1.2 N under the preload force of 3 N.
Zitieren
APA
Jiang, J., & Wang, L. (2026). Development of a Piezoelectric Stick‐Slip Actuator With Two L‐Shaped Flexure Hinges in Series Connection. Energy Technology, 14(6). https://doi.org/10.1002/ente.70526
Vancouver
Jiang J, Wang L. Development of a Piezoelectric Stick‐Slip Actuator With Two L‐Shaped Flexure Hinges in Series Connection. Energy Technology. 2026;14(6). doi:10.1002/ente.70526
BibTeX
@article{Jiang2026,
author = {Jiang, Junxiang and Wang, Liang},
title = {Development of a Piezoelectric Stick‐Slip Actuator With Two L‐Shaped Flexure Hinges in Series Connection},
journal = {Energy Technology},
year = {2026},
volume = {14},
number = {6},
doi = {10.1002/ente.70526}
}
EUVIMED