Planar Solid Oxide Fuel Cell Fabricated by Aqueous Reverse Sequential Tape‐Casting of the Anode, Electrolyte, and Barrier Layer
Energy Technology · 2023-10 · 11 (10)
DOI: 10.1002/ente.202300020 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energy Technology, online erschienen am 08.08.2023. Verfasst von Laura Parvaix und 4 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
A low‐cost manufacturing procedure has been developed for the fabrication of planar anode‐supported solid oxide fuel cell including only two thermal treatments. This method is also environmental friendly because slurries are water based and use nontoxic additives. Slurries are formulated by optimizing the powder quantity, by minimizing the organic compounds while controlling their stabilities and their rheological properties. Flexible multilayer green tapes have been produced by using the reverse sequential tape‐casting method. After a cosintering thermal treatment under loads, planar anodic half‐cells have been produced allowing the deposition of a La 2 NiO 4+δ cathode by screen printing. After the final consolidation thermal treatment, the cell presents a 30 μm‐thick porous cathode, a 530 μm‐thick NiO‐YSZ porous anode, and a 80 μm‐thick dense electrolyte with a gradient of composition: 10GDC on the cathode side to prevent the apparition of the La 2 Zr 2 O 7 insulating phase and 8YSZ on the anode side to avoid the reduction of 10GDC with the fuel gas. Power densities present promising performances (319 mW cm − 2 at 830 °C) given that electrolyte thickness and electrochemical system measurement may be improved.
Zitieren
APA
Parvaix, L., Duluard, S., Ansart, F., Lenormand, P., & Rozier, P. (2023). Planar Solid Oxide Fuel Cell Fabricated by Aqueous Reverse Sequential Tape‐Casting of the Anode, Electrolyte, and Barrier Layer. Energy Technology, 11(10). https://doi.org/10.1002/ente.202300020
Vancouver
Parvaix L, Duluard S, Ansart F, Lenormand P, Rozier P. Planar Solid Oxide Fuel Cell Fabricated by Aqueous Reverse Sequential Tape‐Casting of the Anode, Electrolyte, and Barrier Layer. Energy Technology. 2023;11(10). doi:10.1002/ente.202300020
BibTeX
@article{Parvaix2023,
author = {Parvaix, Laura and Duluard, Sandrine and Ansart, Florence and Lenormand, Pascal and Rozier, Patrick},
title = {Planar Solid Oxide Fuel Cell Fabricated by Aqueous Reverse Sequential Tape‐Casting of the Anode, Electrolyte, and Barrier Layer},
journal = {Energy Technology},
year = {2023},
volume = {11},
number = {10},
doi = {10.1002/ente.202300020}
}
EUVIMED