Structural Reliability Analysis Method of Test Flight Vehicle Based on Copula–Kriging Model
Engineering Reports · 2026-11 · 8 (11)
DOI: 10.1002/eng2.71178 ↗Kurz gefasst
Fachartikel in der Zeitschrift Engineering Reports, online erschienen am 17.11.2026. Verfasst von Dong‐wei Li und 3 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Direct large‐scale reliability analysis of test‐flight vehicles with high‐fidelity finite‐element models is computationally expensive when mass, geometry, material properties, temperature, aerodynamic load, and inertial load are uncertain. This study establishes a Copula–Kriging framework for structural reliability analysis. A 10‐dimensional random vector comprising mass m , thickness t , temperature difference Δ T , characteristic radius r , elastic modulus E , Poisson's ratio ν , concentrated load F , Y‐axis bending moment M y , dynamic pressure q , and Y‐axis moment of inertia I y is modeled using fitted marginal distributions and a Copula dependence structure. Joint samples are then used to train a 10‐dimensional anisotropic Kriging surrogate. Taking maximum von Mises stress as the response, the limit‐state function is g ( X ) = T − σ max ( X ), and failure probability and reliability index are estimated by surrogate‐based Monte Carlo simulation. The framework also evaluates accuracy near the limit‐state boundary and high‐stress tail, propagates Kriging predictive variance to failure probability, and examines sensitivity to Copula tail behavior and correlation‐matrix uncertainty. For the independent validation set, the Kriging model achieves R 2 = 0.9841, RMSE = 8.6462 MPa, and MAPE = 3.5081%. With 2 × 10 6 Monte Carlo samples, the failure probabilities at thresholds 137, 235, 320, and 630 MPa are 0.5666, 0.1407, 0.0361, and 1.0 × 10 −4 , respectively. The coefficient of variation for the 10 −4 result is about 7.07%. Results show that ignoring dependence can substantially alter high‐threshold tail probabilities; therefore, dependence‐model and surrogate‐model uncertainty should be considered in reliability assessment.
Zitieren
APA
Li, D., Du, Z., Li, B., & Ji, X. (2026). Structural Reliability Analysis Method of Test Flight Vehicle Based on Copula–Kriging Model. Engineering Reports, 8(11). https://doi.org/10.1002/eng2.71178
Vancouver
Li D, Du Z, Li B, Ji X. Structural Reliability Analysis Method of Test Flight Vehicle Based on Copula–Kriging Model. Engineering Reports. 2026;8(11). doi:10.1002/eng2.71178
BibTeX
@article{Li2026,
author = {Li, Dong‐wei and Du, Zhao and Li, Bo and Ji, Xiao‐miao},
title = {Structural Reliability Analysis Method of Test Flight Vehicle Based on Copula–Kriging Model},
journal = {Engineering Reports},
year = {2026},
volume = {8},
number = {11},
doi = {10.1002/eng2.71178}
}
EUVIMED