EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical Investigation of MHD ‐Driven Heat and Mass Transfer in a Porous Enclosure Filled With Cu–Water Nanofluid

Samiha Islam Tanni, Muhammad Shafiq Ahmed, Rohani Us Shams Zaman, Faria Kabir Ava, Imran Shabir Chuhan

Engineering Reports · 2026-10 · 8 (10)

DOI: 10.1002/eng2.71053 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Engineering Reports, online erschienen am 14.10.2026. Verfasst von Samiha Islam Tanni und 4 weiteren Autor:innen. Die Arbeit nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The main objective of this research is to investigate the natural convection and heat transfer characteristics of Cu‐water nanofluid in a porous cavity with circular obstacles. This study examines the combined effects of magnetic damping, porous resistance, buoyancy, nanoparticle‐enhanced transport, obstacle arrangement, and enclosure geometry on heat and mass transfer. The governing nonlinear partial differential equations describing fluid flow and heat–mass transfer are solved using the finite element method (FEM). A detailed parametric analysis is conducted by varying the Darcy number, Rayleigh number, Hartmann number, nanoparticle volume fraction, and aspect ratio, while grid independence is ensured for solution accuracy. The results reveal that increasing the Darcy and Rayleigh numbers significantly enhances fluid circulation and promotes convection‐dominated heat transfer. Lower aspect ratio configurations produce stronger circulation and higher thermal performance compared to higher aspect ratios. The higher Hartmann number strengthens the Lorentz force, weakens fluid circulation, and reduces convective transport. The addition of nanoparticles has a marginal influence on heat transfer, with the average Nusselt number decreasing slightly (approximately 0.04%–0.06%) as the nanoparticle volume fraction increases, while mass transfer exhibits greater sensitivity to nanoparticle loading. This study examines the combined effects of porous permeability, magnetic field strength, cavity geometry, and nanoparticle concentration on coupled heat and mass transfer in an obstructed enclosure.

Zitieren

APA

Tanni, S. I., Ahmed, M. S., Zaman, R. U. S., Ava, F. K., & Chuhan, I. S. (2026). Numerical Investigation of MHD ‐Driven Heat and Mass Transfer in a Porous Enclosure Filled With Cu–Water Nanofluid. Engineering Reports, 8(10). https://doi.org/10.1002/eng2.71053

Vancouver

Tanni SI, Ahmed MS, Zaman RUS, Ava FK, Chuhan IS. Numerical Investigation of MHD ‐Driven Heat and Mass Transfer in a Porous Enclosure Filled With Cu–Water Nanofluid. Engineering Reports. 2026;8(10). doi:10.1002/eng2.71053

BibTeX
@article{Tanni2026,
  author = {Tanni, Samiha Islam and Ahmed, Muhammad Shafiq and Zaman, Rohani Us Shams and Ava, Faria Kabir and Chuhan, Imran Shabir},
  title = {Numerical Investigation of MHD ‐Driven Heat and Mass Transfer in a Porous Enclosure Filled With Cu–Water Nanofluid},
  journal = {Engineering Reports},
  year = {2026},
  volume = {8},
  number = {10},
  doi = {10.1002/eng2.71053}
}
Kostenlos starten →