Performance, Emission, and Optimization Analysis of a Diesel Engine Fueled With Waste‐Derived Tallow Biodiesel
Engineering Reports · 2026-07 · 8 (7)
DOI: 10.1002/eng2.70930 ↗Kurz gefasst
Fachartikel in der Zeitschrift Engineering Reports, online erschienen am 16.07.2026. Verfasst von Pratik V. Swami und 4 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The increasing need for sustainable and less emissions fuels has created an interest in using waste derived feedstock for biodiesel production and its use in compression ignition engines. This study experimentally examines the suitability of mutton tallow biodiesel blends in diesel engines and employs multi response optimization framework based on Taguchi method integrated with Gray relational analysis. The performance responses such as brake thermal efficiency and brake specific fuel consumption and emission responses such as carbon monoxide (CO), unburnt hydrocarbons (HC), nitrogen oxides (NO x ), carbon dioxide (CO 2 ), and smoke opacity were assessed by varying the biodiesel blend ratio, engine load and injection pressure. Analysis of variance (ANOVA) is also conducted to identify the statistical significance and contribution of each control parameter. ANOVA results indicates that engine load is the most significant parameter followed by blend ratio and injection pressure affecting all the performance and emission responses. Experiments were conducted on a single cylinder CRDI diesel engine under varying operating conditions including fuel bend ratio (B0–B100), engine load (0–12 kg), and injection pressure (400–600 bar). The results indicate that B20 waste tallow biodiesel blend achieved the highest BTE of 25%, which is slightly higher than diesel, while BSFC decreased by about 8%. Furthermore, emissions such as CO, HC and smoke were decreased by about 41%, 72%, and 74%, respectively. However, NOx emissions increased by approximately 29% for higher biodiesel blends. The findings confirm that mutton tallow biodiesel blend of 20% is a favorable, ecologically friendly fuel, suitable for practical engine applications under optimized operating conditions, that is, 12 kg of load and 600 bar of injection pressure. Overall, this investigation establishes the use of waste animal fat–based biodiesel as a sustainable and most promising alternative to conventional diesel, enabling emission reduction and resource utilization without major engine modifications.
Zitieren
APA
Swami, P. V., Kamate, S. C., Topannavar, S. N., Kumar, M., & Avalappa, M. G. (2026). Performance, Emission, and Optimization Analysis of a Diesel Engine Fueled With Waste‐Derived Tallow Biodiesel. Engineering Reports, 8(7). https://doi.org/10.1002/eng2.70930
Vancouver
Swami PV, Kamate SC, Topannavar SN, Kumar M, Avalappa MG. Performance, Emission, and Optimization Analysis of a Diesel Engine Fueled With Waste‐Derived Tallow Biodiesel. Engineering Reports. 2026;8(7). doi:10.1002/eng2.70930
BibTeX
@article{Swami2026,
author = {Swami, Pratik V. and Kamate, Sannappa C. and Topannavar, Shivanagouda N. and Kumar, Mukesh and Avalappa, Manjunath G.},
title = {Performance, Emission, and Optimization Analysis of a Diesel Engine Fueled With Waste‐Derived Tallow Biodiesel},
journal = {Engineering Reports},
year = {2026},
volume = {8},
number = {7},
doi = {10.1002/eng2.70930}
}
EUVIMED