EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Low Power and Energy‐Efficient Design of MTJ / FinFET Circuits

Pillem Ramesh, Atul S. M. Tripathi

Engineering Reports · 2026-03 · 8 (3)

DOI: 10.1002/eng2.70672 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Engineering Reports, online erschienen am 06.03.2026. Verfasst von Pillem Ramesh und 1 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As technological nodes are scaled down to the nanoscale, power consumption emerges as a critical challenge in complementary metal‐oxide‐semiconductor (CMOS) technology. Emerging nanotechnologies and logic‐in‐memory (LIM) have been explored as promising solutions. The magnetic tunnel junction (MTJ), a spintronic device, consumes lower static power than the CMOS and FinFET technologies. Compared to the existing LIM‐based MTJ/CMOS designs, the proposed MTJ/FinFET systems consume less energy, have a shorter delay, and utilize less static power. These improvements are due to the FinFETs' improved gate control and its lowest 7 nm technology, and the precharge sense amplifier's (PCSA) charge sharing. A HSPICE circuit simulator simulates the design utilizing the 7 nm FinFET and perpendicular MTJ (PMTJ) models. According to the simulation results, the suggested MTJ/FinFET‐based OR/NOR, AND/NAND, and XOR/XNOR circuits perform noticeably better in energy consumption, delay, and power than LIM1 (a PCSA‐based design) and LIM2 (a modified PCSA‐based design). The results indicate that the proposed MTJ/FinFET designs improve overall efficiency compared with LIM2, which is the second‐best performing MTJ/CMOS in terms of static power and energy. The OR/NOR gates reduce static power, delay, and energy by 29.42%, 54.23%, and 68.42%; the AND/NAND design lowers them by 7.69%, 55.32%, and 58.18%; and the XOR/XNOR gates achieve reductions of 13.12%, 65.52%, and 70.27%, respectively. This study elucidates the superior performance of the MTJ/FinFET designs over existing LIM structures when logic circuits are implemented.

Zitieren

APA

Ramesh, P., & Tripathi, A. S. M. (2026). Low Power and Energy‐Efficient Design of MTJ / FinFET Circuits. Engineering Reports, 8(3). https://doi.org/10.1002/eng2.70672

Vancouver

Ramesh P, Tripathi ASM. Low Power and Energy‐Efficient Design of MTJ / FinFET Circuits. Engineering Reports. 2026;8(3). doi:10.1002/eng2.70672

BibTeX
@article{Ramesh2026,
  author = {Ramesh, Pillem and Tripathi, Atul S. M.},
  title = {Low Power and Energy‐Efficient Design of MTJ / FinFET Circuits},
  journal = {Engineering Reports},
  year = {2026},
  volume = {8},
  number = {3},
  doi = {10.1002/eng2.70672}
}
Kostenlos starten →