Design and Analysis of Carbon‐Supported NiMo HER Catalysts and Electrodes for High Performance All PGM‐Free AEM Electrolysers
Electrochemical Science Advances · 2025-06 · 5 (3)
DOI: 10.1002/elsa.202400027 ↗Kurz gefasst
Fachartikel in der Zeitschrift Electrochemical Science Advances, online erschienen am 17.01.2025. Verfasst von Lukas Heinius und 8 weiteren Autor:innen. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft, Bundesministerium für Bildung und Forschung.
Abstract (Originalsprache)
The influence of the nature of carbon‐support materials on the structure and the electrochemical performance of NiMo cathode catalysts is investigated. Carbon materials addressed in this study include Ketjen Black, Vulcan and MWCNT‐COOH. A one pot, easily scalable, hydrothermal microwave synthesis with a subsequent hydrogen reduction step was applied for the preparation of the catalyst materials. The structures and compositions of the catalysts were characterized by TEM/SEM, XRD, ICP‐OES, BET and STEM‐EDX. The performance of the catalysts was tested using rotating disc electrode (RDE) and anion exchange membrane (AEM) single‐cell electrolyser to downselect the most active material. The influence of pH, catalyst loading and type of carbon support was investigated to optimize the operating conditions. By increasing the KOH concentration from 0.1 to 1 M in an AEM electrolysis cell, the current density could be more than doubled, whereas the introduction of a carbon support raised the current density by a factor of seven. Finally, it is demonstrated how applying a novel bar‐coating preparation of the electrodes in a PGM‐free AEM electrolyser enabled a favourable current density of 1 A cm −2 at 2.04 V. This performance is comparable to earlier systems but requires only a fraction of the catalyst loading.
Förderung
- Deutsche Forschungsgemeinschaft
- Bundesministerium für Bildung und Forschung
Zitieren
APA
Heinius, L., Klingenhof, M., Weiser, G., Schröer, P., Metzler, L., Koch, S., Selve, S., Vierrath, S., & Strasser, P. (2025). Design and Analysis of Carbon‐Supported NiMo HER Catalysts and Electrodes for High Performance All PGM‐Free AEM Electrolysers. Electrochemical Science Advances, 5(3). https://doi.org/10.1002/elsa.202400027
Vancouver
Heinius L, Klingenhof M, Weiser G, Schröer P, Metzler L, Koch S, et al. Design and Analysis of Carbon‐Supported NiMo HER Catalysts and Electrodes for High Performance All PGM‐Free AEM Electrolysers. Electrochemical Science Advances. 2025;5(3). doi:10.1002/elsa.202400027
BibTeX
@article{Heinius2025,
author = {Heinius, Lukas and Klingenhof, Malte and Weiser, Gregor and Schröer, Pierre and Metzler, Lukas and Koch, Susanne and Selve, Sören and Vierrath, Severin and Strasser, Peter},
title = {Design and Analysis of Carbon‐Supported NiMo HER Catalysts and Electrodes for High Performance All PGM‐Free AEM Electrolysers},
journal = {Electrochemical Science Advances},
year = {2025},
volume = {5},
number = {3},
doi = {10.1002/elsa.202400027}
}
EUVIMED