Investigating the electrowetting of silver‐based gas‐diffusion electrodes during oxygen reduction reaction with electrochemical and optical methods
Electrochemical Science Advances · 2023-02 · 3 (1)
DOI: 10.1002/elsa.202100158 ↗Kurz gefasst
Fachartikel in der Zeitschrift Electrochemical Science Advances, online erschienen am 30.03.2022. Verfasst von Fabian Bienen und 10 weiteren Autor:innen. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Porous gas‐diffusion electrodes (GDEs) are widely used in electrochemical applications where a gaseous reactant is converted to a target product. Important applications for silver‐based GDEs are the chlor‐alkali and the CO 2 electrolysis processes in which silver catalyzes the oxygen‐ or carbon dioxide reduction reaction. The wetting of the porous GDEs is of utmost importance for the achieved performance of the electrode: a completely dry electrode will result in low current densities due to the reduced active surface area while on the other hand, a completely flooded electrode will deteriorate the access of the gaseous reactant. Therefore, we investigated silver‐based GDEs for the oxygen reduction reaction with different amounts of the hydrophobic agent polytetrafluoroethylene (PTFE) and analyzed the potential‐induced wetting behavior (electrowetting). The electrolyte breakthrough was recorded by a digital microscope and subsequently evaluated via imaging analysis of the observed breached electrolyte droplets. In order to characterize the wetting state during transition to the steady‐state, we applied electrochemical impedance spectroscopy measurements and retrieved the double‐layer capacitance. Our results indicate that a higher overvoltage facilitates the breakthrough of electrolytes through the gas‐diffusion electrode. Surprisingly, a faster breakthrough of electrolyte was observed for electrodes with higher PTFE content. Porometry measurements revealed that the GDE with low PTFE content has a monomodal pore size distribution, whereas electrodes with higher PTFE amount exhibit a bimodal pore size distribution. In GDEs with monomodal pore size distribution the time in which the double layer capacitance is leveling off correlates with the breakthrough time of the electrolyte. In summary, we emphasize that the wetting of GDEs is a complex interplay of the applied potential, electrode composition, and resulting porous structure which requires further advanced measurements and analysis considering the parameters affecting the wetting behavior as a whole.
Zitieren
APA
Bienen, F., Paulisch, M. C., Mager, T., Osiewacz, J., Nazari, M., Osenberg, M., Ellendorff, B., Turek, T., Nieken, U., Manke, I., & Friedrich, K. A. (2023). Investigating the electrowetting of silver‐based gas‐diffusion electrodes during oxygen reduction reaction with electrochemical and optical methods. Electrochemical Science Advances, 3(1). https://doi.org/10.1002/elsa.202100158
Vancouver
Bienen F, Paulisch MC, Mager T, Osiewacz J, Nazari M, Osenberg M, et al. Investigating the electrowetting of silver‐based gas‐diffusion electrodes during oxygen reduction reaction with electrochemical and optical methods. Electrochemical Science Advances. 2023;3(1). doi:10.1002/elsa.202100158
BibTeX
@article{Bienen2023,
author = {Bienen, Fabian and Paulisch, Melanie C. and Mager, Thorben and Osiewacz, Jens and Nazari, Manigah and Osenberg, Markus and Ellendorff, Barbara and Turek, Thomas and Nieken, Ulrich and Manke, Ingo and Friedrich, K. Andreas},
title = {Investigating the electrowetting of silver‐based gas‐diffusion electrodes during oxygen reduction reaction with electrochemical and optical methods},
journal = {Electrochemical Science Advances},
year = {2023},
volume = {3},
number = {1},
doi = {10.1002/elsa.202100158}
}
EUVIMED