EUVIMEDEUVIMED entdecken
Open Access

3D‐Printed Microfluidic‐Based Cell Culture System With Analysis to Investigate Macrophage Activation

Major A Selemani, Giraso Keza Monia Kabandana, Chengpeng Chen, R Scott Martin

ELECTROPHORESIS · 2025

DOI: 10.1002/elps.8109 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ELECTROPHORESIS, 2025. Verfasst von Major A Selemani und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, Saint Louis University, St. Louis, Missouri, USA. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Macrophage Activation, Microfluidic Analytical Techniques, Lab-On-A-Chip Devices. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 72 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar. Gefördert von: NINDS NIH HHS, NIGMS NIH HHS, NIH HHS.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, we describe the development of 3D‐printed microfluidic cell culture devices that can be coupled with a circulation system to study the dynamics of both intracellular and extracellular (release) processes. Key to this approach is the ability to quantitate key analytes on a minutes timescale with either on‐line (in this study, quantitating nitric oxide production using an amperometric flow cell) or off‐line (in this work, quantitating intracellular itaconate production with LC/MS) analytical measurements. To demonstrate the usefulness of this approach, we chose to study macrophage polarization as a function of the extracellular matrix (silk) fiber size, a major area of research in tissue engineering. It was found that the use of larger fibers (1280 nm vs. smaller 512 nm fibers) led to increases in the production of both nitric oxide and itaconate. These findings set the foundation for future research for the creation of finely tuned microfluidic 3D cell culture approaches in areas where flow and the extracellular matrix play a significant role in barrier transport and where integrated analysis of key markers is needed.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalMacrophage ActivationMicrofluidic Analytical TechniquesLab-On-A-Chip DevicesCell Culture TechniquesNitric OxideAnimalsMiceEquipment DesignMacrophagesSuccinatesRAW 264.7 Cells

Substanzen

Nitric OxideSuccinatesitaconic acid

Autor:innen und Institutionen

  • Department of Chemistry, Saint Louis University, St. Louis, Missouri, USA.
  • Department of Chemistry and Biochemistry, University of Maryland-Baltimore County, Baltimore, Maryland, USA.
  • Saint Louis University Center for Additive Manufacturing, St. Louis, Missouri, USA.

Förderung

  • NINDS NIH HHS
  • NIGMS NIH HHS
  • NIH HHS
  • National Institutes of Health

Zitieren

APA

Selemani, M. A., Kabandana, G. K. M., Chen, C., & Martin, R. S. (2025). 3D‐Printed Microfluidic‐Based Cell Culture System With Analysis to Investigate Macrophage Activation. ELECTROPHORESIS. https://doi.org/10.1002/elps.8109

Vancouver

Selemani MA, Kabandana GKM, Chen C, Martin RS. 3D‐Printed Microfluidic‐Based Cell Culture System With Analysis to Investigate Macrophage Activation. ELECTROPHORESIS. 2025. doi:10.1002/elps.8109

BibTeX
@article{Selemani2025,
  author = {Selemani, Major A and Kabandana, Giraso Keza Monia and Chen, Chengpeng and Martin, R Scott},
  title = {3D‐Printed Microfluidic‐Based Cell Culture System With Analysis to Investigate Macrophage Activation},
  journal = {ELECTROPHORESIS},
  year = {2025},
  doi = {10.1002/elps.8109}
}
Kostenlos starten →